Complete Not another WH20 !

[Beowulfz07]

@Beowulfz07 - is that a guitar amp I spot in a photo

Yes Phil
Well spotted
Hiwatt 2x12 nice and clean for my Gilmour Rig

 

[Pick Holder]

Yes Phil
Well spotted
Hiwatt 2x12 nice and clean for my Gilmour Rig

I love my fender twin - but I hate the weight !

 

[Beowulfz07]

I love my fender twin - but I hate the weight !

I know what you mean, I had a Reeves Custom 50 PS head with the matching 2 x 12 cab that was a replica of the sound city bottom ported cab and Jesus that was a lump !

 

[The seeker]

I had a orange cab 2x12 and our practice room was up a flight of stairs ... that was fun also dropped a nice midtown down those same stairs

 

[Pick Holder]

I had a orange cab 2x12 and our practice room was up a flight of stairs ... that was fun also dropped a nice midtown down those same stairs

Rehearsal rooms upstairs are a no-no. Or in basements.....
At my age now we rent a ground floor room.

 

[The seeker]

All the good old days of being in a room of friends

 

[Beowulfz07]

Small update,
Coindoor on, new blue start button, serial number decals on, a few bits n pieces and a Titan lockdown receiver decal which I always like on both new and used receivers

 

[Beowulfz07]

Also put inner art blades on as mirror blades would be a waste on this machine.
Fitted the led flipper buttons and flipper switches.
Cabinet loom has been thoroughly cleaned and repaired where requires and ready to go in for wrapping tomorrow

 

[MadNat]

Nice bit of cable wrap there Tony. Looking very nice indeed

 

[Beowulfz07]

Thanks Mike,
Wrapping the entire cabinet and playfield

 

[Beowulfz07]

This machine had some major hacks and rewires done to it

 

[Beowulfz07]

The cabinet loom has been completely cleaned and hacked cables replaced with correct colours and new connectors where required

 

[Beowulfz07]

Just a reminder of how the cabinet looked when I started.
Today the cabinet is finished.
Got too dark to take a decent pic with the glass in, but the cabinet loom has been wrapped, new speaker cables, shaker cable, power cable for speaker panel lights have been run in with the loom.
Flipper led cables connected and wrapped.
The subwoofer out cable will be added into the loom once the backbox is on.
Coindoor finished and wired up, just missing the coin return flap which I need to source from somewhere.
New side rails and rear glass receiver fitted.
Invisiglass and new lockdown bar on.
So cabinet ready for playfield when done shortly.
Backbox just needs the topper dome fixing in place and the CPR mirror installed

 

[Beowulfz07]

Couldn’t resist putting a 9v battery on the coin door connector to see how the coin door lights up and I’m really pleased and it’s certainly better than the rivets that were there before so big thanks to Vimtoman and Collywobbles

 

[B3zza]

Lovely restoration job, not a single part left unturned. If you dont mind me asking, Is this a keeper or this for sale when it’s all done??

 

[Beowulfz07]

Lovely restoration job, not a single part left unturned. If you dont mind me asking, Is this a keeper or this for sale when it’s all done??

Thankyou, and no I don’t mind you asking.
I am hoping to keep this one when it’s done, especially after selling both the TOM’s as soon as they were finished.
But if I do have to sell it will be listed here first,
Thanks
Tony

 

[Beowulfz07]

Here’s the cabinet with the lockdown bar and invisiglass in.

 

[Beowulfz07]

I finally found the missing coin return flap, it was hidden with the powder coated hinges.
Fitted today so cabinet completely finished and ready for playfield

 

[The seeker]

can't wait to see the whole thing up and running , nice work

 

[Beowulfz07]

Finished cleaning the lightboard loom, had to replace 3 cables and fit a new connector.
Fitted all the sockets to loom along with all the hardware.
Wrapped the loom and it’s now in the backbox.
Just the cpr mirror to fit once the surround arrives

 

[Beowulfz07]

can't wait to see the whole thing up and running , nice work

Thankyou, I can’t wait to finally see it finished and working too

 

[Beowulfz07]

Finally sorted the trim for the CPR mirror and installed.
Playfield has been stripped and sorted into bags ready for cleaning

 

[Tony]

Wow that looks super nice!

 

[Beowulfz07]

Wow that looks super nice!

Thanks Tony, it’s taken a while but worth the effort when you get to this point.
Just hope I don’t muck the playfield up lol

 

[mission65]

Looking epic Tony, nice job

 

[Beowulfz07]

Looking epic Tony, nice job

Thankyou

 

[waynej4]

Very nice, indeed!

Another couple of questions, if you don't mind?

For the painting, did you just use a brush for the blue colour?

Also, who did the WH2O coin door sign for you? I recall seeing on a facebook post somewhere that they would entertain trialling it with the 2 next to the H?

Would like to look at getting one done for my WH2O, if possible.

 

[Beowulfz07]

Very nice, indeed!

Another couple of questions, if you don't mind?

For the painting, did you just use a brush for the blue colour?

Also, who did the WH2O coin door sign for you? I recall seeing on a facebook post somewhere that they would entertain trialling it with the 2 next to the H?

Would like to look at getting one done for my WH2O, if possible.

Hi
Yes the blue was brushed on.
Collywobbles is your man for the WH20 acrylics and a lot more

 

[Beowulfz07]

Playfield stripped and loom ready for cleaning.
Rails stripped and sanded

 

[Beowulfz07]

Playfield brackets, apron and shooter guard powder coated.
Thanks to my wife, Jolanta for putting the decals on so well