Complete Not another WH20 !

OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Mantis protectors fitted and just thought I’d show what appears to be a problem when using mantis protectors with cliffys ramp protector.
If you look on cliffs website he is showing his longer ramp protector fitted with the wrong side mantis target protector.
This means that the mantis sits too far left and reduces the lane opening.
The mantis protectors are target and ramp protectors and the right hand one is designed to wrap around and overlap the factory fitted protector.
If you fit cliffs improved protector that has a 90 degree bend on the end which stops the mantis from fitting.
I have contacted Cliff and advised him to provide 2 options for his protector, as it is for use without mantis target protectors and one with the angle removed for use with mantis.
I also had an issue with the left mantis overhanging the ramp cutout, which prevented the left ramp from fitting correctly.
My ramps are new and thicker, so that probably doesn’t help.
Anyway, I simply marked the mantis protector where it was overhanging and removed that section with a dremel.
I probably removed more than I needed to but it fits perfectly now, and I didn’t have to adjust the targets either and they work perfectly.
I have read that people had issues where only a hard shot would register when used with mantis and some people even replaced the square targets with the smaller flat targets.
I believe that if the ramps and mantis protectors are fitted correctly you shouldn’t have any issues at all.
 

Attachments

  • 048C9A9D-9BF6-4026-AACB-75E169B07AA5.png
    048C9A9D-9BF6-4026-AACB-75E169B07AA5.png
    193.6 KB · Views: 25
  • D83F1655-8892-4AB2-A7E5-69132AEBFDD0.png
    D83F1655-8892-4AB2-A7E5-69132AEBFDD0.png
    91.2 KB · Views: 26
  • DDDD3BAF-3EC0-4223-993E-7329E7F9D0A1.png
    DDDD3BAF-3EC0-4223-993E-7329E7F9D0A1.png
    158.3 KB · Views: 24
  • 203AAA7D-B838-4542-A8C8-C6235D20C8AB.png
    203AAA7D-B838-4542-A8C8-C6235D20C8AB.png
    96.3 KB · Views: 22
  • 6BB8A820-7C20-4F3A-8D39-6AA2AACB6332.png
    6BB8A820-7C20-4F3A-8D39-6AA2AACB6332.png
    159.4 KB · Views: 21
  • BC1133D0-57B9-4CD6-AFA6-AA8B3C377954.png
    BC1133D0-57B9-4CD6-AFA6-AA8B3C377954.png
    60 KB · Views: 21
  • 9913E3D9-D547-4306-86D9-57D6A92D52A4.png
    9913E3D9-D547-4306-86D9-57D6A92D52A4.png
    149.8 KB · Views: 20
  • F7AE9D1F-1804-4259-B4E7-BEDF64B738F4.png
    F7AE9D1F-1804-4259-B4E7-BEDF64B738F4.png
    79.9 KB · Views: 20
  • 9AED6742-4F07-4D9F-B78D-81D421C44D5F.png
    9AED6742-4F07-4D9F-B78D-81D421C44D5F.png
    88.9 KB · Views: 20
  • D043B8F6-2113-4071-AF97-94B446EE0455.png
    D043B8F6-2113-4071-AF97-94B446EE0455.png
    149.9 KB · Views: 19
  • BDF2D78D-35FC-428D-82D3-7524B9CE78CF.png
    BDF2D78D-35FC-428D-82D3-7524B9CE78CF.png
    166.9 KB · Views: 18
  • 77EE1E90-CF3B-4F89-8288-EE0F997C2A68.png
    77EE1E90-CF3B-4F89-8288-EE0F997C2A68.png
    118.6 KB · Views: 17
  • 4E38EEEE-A1DF-4FE9-918B-66FE13967E0A.png
    4E38EEEE-A1DF-4FE9-918B-66FE13967E0A.png
    153.2 KB · Views: 15
  • A8123DA8-6993-4E5E-A1AB-DD030BAB5894.png
    A8123DA8-6993-4E5E-A1AB-DD030BAB5894.png
    100.3 KB · Views: 24
  • Like
Reactions: Jb3d and Rpearsonx
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Another couple of switches done.
I have 4 more to do !
 

Attachments

  • F5AF0247-D438-4031-B8A8-4F3600DD5602.jpeg
    F5AF0247-D438-4031-B8A8-4F3600DD5602.jpeg
    208.3 KB · Views: 8
  • 3547A28A-22E6-4911-A857-47641F5FBEFD.jpeg
    3547A28A-22E6-4911-A857-47641F5FBEFD.jpeg
    215.1 KB · Views: 8
  • Like
Reactions: Jb3d
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Upper playfield almost finished.
Need to attach the whirlpool ramp and then it’s going on the playfield tomorrow
 

Attachments

  • ADD98B55-F6B0-436C-A645-524DAD0D6585.jpeg
    ADD98B55-F6B0-436C-A645-524DAD0D6585.jpeg
    264.3 KB · Views: 10
  • 346AE991-5F85-4874-A6DB-5AB7364F5B16.jpeg
    346AE991-5F85-4874-A6DB-5AB7364F5B16.jpeg
    221.6 KB · Views: 10
  • FB04A6CA-C7BC-4B5B-B7E6-DD6093ABEE08.jpeg
    FB04A6CA-C7BC-4B5B-B7E6-DD6093ABEE08.jpeg
    171.8 KB · Views: 10
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Upper playfield finally in !
The new ramps are thicker, so a fair bit of relocating and manoeuvring to do to get everything to sit correctly prior to fixing.
Spent a lot of time trying to find where a flasher was supposed to go as it clearly wasn’t in the correct place when I took it off, turns out someone bent the bracket and fixed it in the side of the playfield when it should have been fitted to the right side of upper playfield as it is the cave flasher.
2nd ramp fixed in place too.
Wrapped alll the flasher cables and connected up most of the upper playfield connectors and flashers under the playfield.
Made a bracket which will sit on backboard above mini playfield and fitted with orange led strip linked to gi to illuminate mountain from underneath which I’ll fit tomorrow.
Right mountain plastic fitted.
Oh and playfield protector removed.
I wasn’t happy with the water marks it was making, I use them all the time without issues but wasn’t working on this so no point to protect the playfield if it looks crap !
Also found some smaller hex posts for the sling spotlights so they will not only clear the glass but give easier individual positioning.
Hopefully last 2 big ramps will have switches done and new decals fitted tomorrow.
 

Attachments

  • F066CF9F-3CF1-4302-8F0F-7A832DDE46CE.jpeg
    F066CF9F-3CF1-4302-8F0F-7A832DDE46CE.jpeg
    246 KB · Views: 20
  • 28D8685D-B5B4-4DDB-963C-9028B07DFC2D.jpeg
    28D8685D-B5B4-4DDB-963C-9028B07DFC2D.jpeg
    158.8 KB · Views: 19
  • 8A9B9458-10E5-411B-B91E-C04627A24657.jpeg
    8A9B9458-10E5-411B-B91E-C04627A24657.jpeg
    227.7 KB · Views: 20
  • 72188835-CDCE-4874-9206-ED4325A2C6AD.jpeg
    72188835-CDCE-4874-9206-ED4325A2C6AD.jpeg
    255.4 KB · Views: 19
  • 1A77316A-733D-4CAF-8BCE-B2A95BA018B3.jpeg
    1A77316A-733D-4CAF-8BCE-B2A95BA018B3.jpeg
    157.6 KB · Views: 19
  • C79F2174-3A00-43F5-812C-58B19249196B.jpeg
    C79F2174-3A00-43F5-812C-58B19249196B.jpeg
    189.2 KB · Views: 21
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Finishing some bits on upper playfield while I can get at it easier, first up the Big Foot Hot Foot mod, led bank installed by diverter, another led bank installed to right of Bigfoot, just the spotlight to fit and the control board.
Fitted the bracket to backboard with amber led strip to light mountains from underneath.
 

Attachments

  • 85D17163-997E-4FD8-AEBB-7CAE2057246E.png
    85D17163-997E-4FD8-AEBB-7CAE2057246E.png
    146.8 KB · Views: 15
  • B58C360B-0C9A-472B-AC8C-265BBE0E627E.png
    B58C360B-0C9A-472B-AC8C-265BBE0E627E.png
    142.9 KB · Views: 15
  • E3F27EC9-67AD-4321-99BF-504E95738A87.png
    E3F27EC9-67AD-4321-99BF-504E95738A87.png
    151.3 KB · Views: 14
  • E5B6C4F5-8A9F-44A4-B098-A2BC07341F1A.png
    E5B6C4F5-8A9F-44A4-B098-A2BC07341F1A.png
    69.7 KB · Views: 15
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Stripped the light board, resoldered pcbs, drilled and riveted bracket to new blue plastic backboard.
Cleaned and wrapped cables, fitted new front plastic and yellow and red comet indicator bulbs.
 

Attachments

  • 22B3BAE3-FF56-4B5A-82F9-7C3ACD599EC4.png
    22B3BAE3-FF56-4B5A-82F9-7C3ACD599EC4.png
    177.5 KB · Views: 9
  • 7159533F-3252-419B-A86C-53F9D0D43CAB.png
    7159533F-3252-419B-A86C-53F9D0D43CAB.png
    181.1 KB · Views: 8
  • 54DFA23A-44A8-4831-9917-0326385C3035.png
    54DFA23A-44A8-4831-9917-0326385C3035.png
    201.2 KB · Views: 7
  • 69423CAF-EDA1-4E37-A028-C754D73B69FB.png
    69423CAF-EDA1-4E37-A028-C754D73B69FB.png
    198.7 KB · Views: 7
  • 2B751771-5A63-44F1-8F9E-EFAC3D45D891.png
    2B751771-5A63-44F1-8F9E-EFAC3D45D891.png
    111.1 KB · Views: 8
  • FB19A281-4933-4EDE-925F-8181947F653B.png
    FB19A281-4933-4EDE-925F-8181947F653B.png
    79.4 KB · Views: 8
  • 060C56E9-D25A-45D2-923D-24EA1535B009.png
    060C56E9-D25A-45D2-923D-24EA1535B009.png
    204.6 KB · Views: 9
  • Like
Reactions: Jb3d and Tony
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Spent rest of the day finally finishing last of the ramp switches, cleaning, soldering and wrapping.
Fitted new plastic around Bigfoot.
Test fitted circular ramp and fitted ramp to right flipper.
 

Attachments

  • 7F7D5922-ED96-46DA-804F-40828A5AC157.png
    7F7D5922-ED96-46DA-804F-40828A5AC157.png
    190.2 KB · Views: 19
  • FFDB18AC-6CA9-46C2-B499-0B426A64F2CF.png
    FFDB18AC-6CA9-46C2-B499-0B426A64F2CF.png
    199.7 KB · Views: 19
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
With 10 days until power on lol 😂 things are creeping along !
Cleaned and polished the popper chute, drilled and fixed the mantis protectors now that ramps are in place and switches are free and adjusted to register easily.
Tightened upper playfield posts as I forgot I loosened them to get the playfield on lol 😂
Fitted switches to canyon ramp and got it in place finally.
Fixed the popper chute, adjusted Bigfoot cave switch and refitted gi socket that I removed for the hot foot mod led bank.
Also had to drill the new ramp for switch bracket fitting as the predrilled hole was out by a lot.
It now all fits together nicely and diverter works freely, sorted out all the fixings ready to fix ramp in place tomorrow
 

Attachments

  • C3868CAF-17E9-4B65-9A00-2B1A7E56C893.jpeg
    C3868CAF-17E9-4B65-9A00-2B1A7E56C893.jpeg
    375.2 KB · Views: 22
  • 41EC7918-EFBD-4988-B018-E954B9D4673B.jpeg
    41EC7918-EFBD-4988-B018-E954B9D4673B.jpeg
    383.2 KB · Views: 25
  • 573E4665-B8DA-4154-A0F0-B9CC1A6971D1.jpeg
    573E4665-B8DA-4154-A0F0-B9CC1A6971D1.jpeg
    206 KB · Views: 23
  • 4565509F-ED1E-43B1-A16A-CDA1BA065EC8.jpeg
    4565509F-ED1E-43B1-A16A-CDA1BA065EC8.jpeg
    156.5 KB · Views: 22
  • 9923FDFD-0F54-45A3-BB63-AE03007B4886.jpeg
    9923FDFD-0F54-45A3-BB63-AE03007B4886.jpeg
    184.3 KB · Views: 23
  • A32DDA50-043E-4E56-BC0D-2BE680CA7070.jpeg
    A32DDA50-043E-4E56-BC0D-2BE680CA7070.jpeg
    132.7 KB · Views: 20
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Shooter rail cleaned.
Rapids ramp also finished and ready to go on, just waiting for a sticker for the left mountain to arrive before I can fit it
 

Attachments

  • 45268B5E-092F-4EBB-8078-F972D7265C80.jpeg
    45268B5E-092F-4EBB-8078-F972D7265C80.jpeg
    357.8 KB · Views: 4
  • 74DB1638-0A2A-4BEC-AA1F-EE710EFBD480.jpeg
    74DB1638-0A2A-4BEC-AA1F-EE710EFBD480.jpeg
    353 KB · Views: 4
  • FCE3F6E5-A0B7-4758-9360-B269CFDC904F.jpeg
    FCE3F6E5-A0B7-4758-9360-B269CFDC904F.jpeg
    419.4 KB · Views: 4
  • 82F5E38A-E5C3-4A8F-91C1-3D5FB0438289.jpeg
    82F5E38A-E5C3-4A8F-91C1-3D5FB0438289.jpeg
    399.6 KB · Views: 4
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Due to thicker ramps, existing screws not long enough to join the ramps together, longer screws finally arrived today so right ramp joined and finished.
Shooter rail fixed and the hot foot mode spotlight fitted to shooter rail.
New Bigfoot cave fitted so right side done.
Just a few bits to do and playfield will be finally done.
 

Attachments

  • E4E582C0-2739-4A70-8AC5-C06EC5EADBC3.jpeg
    E4E582C0-2739-4A70-8AC5-C06EC5EADBC3.jpeg
    196.6 KB · Views: 10
  • B1F6EEE0-BAF4-46BE-8B45-0D56C13B5E1C.jpeg
    B1F6EEE0-BAF4-46BE-8B45-0D56C13B5E1C.jpeg
    138.3 KB · Views: 10
  • B0D96533-3C14-4FE8-86C3-EF8C98CA8C78.jpeg
    B0D96533-3C14-4FE8-86C3-EF8C98CA8C78.jpeg
    157.2 KB · Views: 10
  • 8A8A245A-BD8D-44FA-A5DD-D85F50C3DC57.jpeg
    8A8A245A-BD8D-44FA-A5DD-D85F50C3DC57.jpeg
    199.1 KB · Views: 9
  • 4A132022-3130-4DF2-BEE2-F77DD4B45658.jpeg
    4A132022-3130-4DF2-BEE2-F77DD4B45658.jpeg
    164.8 KB · Views: 10
  • Like
Reactions: Rpearsonx and Jib

The seeker

Site Supporter
Oct 13, 2015
1,059
541
113
Northumberland
Do you have the airball reduction thing installed, i believe there is a kit available ive had a few airballs off the standup targets and im looking for a resolve
 
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Do you have the airball reduction thing installed, i believe there is a kit available ive had a few airballs off the standup targets and im looking for a resolve
Which stand up targets ? The 2 either side of the ramp?
I have mantis protectors installed, they prevent the targets from going back too far when installed correctly.
I’m not aware of any other kit for it
 
  • Like
Reactions: The seeker
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Sticker arrived, thanks Phil Palmer, fitted to left mountain and fitted to playfield.
Left ramp finally on and last switches and sign fitted on entrance to rapids and canyon.
Waterfall light fitted on left ramp.
Rear mountain fitted but will remove to fit the flasher domes tomorrow now that the flashers have been aligned.
 

Attachments

  • 74A12D84-D4D2-4716-BDE4-428C2B3C4C57.jpeg
    74A12D84-D4D2-4716-BDE4-428C2B3C4C57.jpeg
    331 KB · Views: 18
  • C5A966DF-5D2F-4C8B-BD19-01A782171A44.jpeg
    C5A966DF-5D2F-4C8B-BD19-01A782171A44.jpeg
    236.4 KB · Views: 16
  • CD820E19-E3E8-43C7-87F0-6BBBE78EB496.jpeg
    CD820E19-E3E8-43C7-87F0-6BBBE78EB496.jpeg
    246.7 KB · Views: 14
  • B3744BE7-4BD2-4040-958F-00FE6C84130D.jpeg
    B3744BE7-4BD2-4040-958F-00FE6C84130D.jpeg
    175 KB · Views: 15
  • AB660380-1770-40F6-8072-1A5FE0D631C8.jpeg
    AB660380-1770-40F6-8072-1A5FE0D631C8.jpeg
    183.3 KB · Views: 15
  • E5E605AE-4170-4C94-86F2-0F9C5C69439B.jpeg
    E5E605AE-4170-4C94-86F2-0F9C5C69439B.jpeg
    148.1 KB · Views: 16
  • 11BD4F2B-5572-42DF-B998-C45C1C8CD9F9.jpeg
    11BD4F2B-5572-42DF-B998-C45C1C8CD9F9.jpeg
    209.3 KB · Views: 20
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Had to run the OCD GI power cable to the transformer and rewrap cables.
Playfield in at last and looking good.
 

Attachments

  • 805C34E8-C52B-4C6F-800A-7B09ABBA8B51.jpeg
    805C34E8-C52B-4C6F-800A-7B09ABBA8B51.jpeg
    183.1 KB · Views: 23
  • 789E1502-0923-47F3-9060-A058EBFBB4B9.jpeg
    789E1502-0923-47F3-9060-A058EBFBB4B9.jpeg
    233.9 KB · Views: 23
  • 3761C3F8-C058-4C31-AACE-C2722681E29F.jpeg
    3761C3F8-C058-4C31-AACE-C2722681E29F.jpeg
    250.5 KB · Views: 23
  • Like
Reactions: Rpearsonx and Jb3d
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Backbox on, powder coated hinges and bolts fitted.
Also affixed 2 amber led strips under the rear glass receiver to light the mountains from above.
Next up, wiring, flippers and testing
 

Attachments

  • 7002617E-E9AE-4E53-BC8A-82B894371719.jpeg
    7002617E-E9AE-4E53-BC8A-82B894371719.jpeg
    97.4 KB · Views: 27
  • 964D35B3-F760-45A0-9A67-A96D13394DA3.jpeg
    964D35B3-F760-45A0-9A67-A96D13394DA3.jpeg
    159.5 KB · Views: 29
  • 0324F525-6AC9-4BFA-8EB7-FC2ECF11CBA5.jpeg
    0324F525-6AC9-4BFA-8EB7-FC2ECF11CBA5.jpeg
    155.7 KB · Views: 29

Jb3d

Site Supporter
Jan 23, 2015
344
231
43
Matlock
Alias
John
I’ve just read this thread from the start. What fantastic work. Your skill and patience is outstanding. And thanks for taking the time to photograph and share everything.
 
  • Like
Reactions: Beowulfz07
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
T
What cabinet decals did you use? These look better than most I’ve seen.

Great work, it’s looking outstanding


Sent from my iPad using Tapatalk
Thankyou 😃
I can get any decal sets for £175 delivered
I’ve had 5 sets and they’re excellent, baywatch, 2 x Tom’s, WH20 and just got a set for Indy 500.
They are spot on colour wise, not thin, very easy to put on and you can seal them quicker with a heatgun and also remove any creases. Far better than the next gen ones in my opinion
 
  • Like
Reactions: BurnDizzyBurn
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Wired up the rgb speaker lights and the blue led strip, had some fun and games as the speaker leds are 5v and the strip is 12v but got there eventually.
Pic and quick video but the led strip looks bright and whiter than it does in real life, the speaker leds are the usual any colour etc and there is a dimmer on the strip so i can adjust it so it doesn’t overpower the colordmd
 

Attachments

  • DBAE5D11-95DD-4D20-A96F-541F9DD3B6D0.jpeg
    DBAE5D11-95DD-4D20-A96F-541F9DD3B6D0.jpeg
    129 KB · Views: 10
  • IMG_7317.MOV
    9.6 MB · Views: 0
  • Like
Reactions: Tony
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Another small update.
Apron furniture cleaned and fitted, shooter guard also done.
Snapped a superband flipper rubber so had to order more which have now arrived and managed to lose my new ribbon cable set which should arrive tomorrow.
Did manage to fire up the driver board which is the first time both transformers and wiring have been tested since doing them, so a huge relief all works ok and ready to connect up the cabinet fully tomorrow and test prior to connecting the playfield once I’ve plugged the upper playfield in underneath.
 

Attachments

  • D709D368-FF15-4B97-A559-2B180BEC3D43.jpeg
    D709D368-FF15-4B97-A559-2B180BEC3D43.jpeg
    180.2 KB · Views: 8
  • 9BFDA030-31DF-4BF6-9BAF-F508081AE599.jpeg
    9BFDA030-31DF-4BF6-9BAF-F508081AE599.jpeg
    171.5 KB · Views: 9
  • A9798EFF-3323-4E9F-AA56-16762106CE01.jpeg
    A9798EFF-3323-4E9F-AA56-16762106CE01.jpeg
    196.7 KB · Views: 8
  • 2AB10920-958D-42C5-BE5B-1E41B38501F9.jpeg
    2AB10920-958D-42C5-BE5B-1E41B38501F9.jpeg
    292.5 KB · Views: 8
  • Like
Reactions: astyy and Jib
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
Machine finally on legs, connected up and original foil topper tested and working great
 

Attachments

  • IMG_7453.MOV
    2.6 MB · Views: 0
  • BA569A81-A50F-4B2C-BFAC-564DDD8DA894.jpeg
    BA569A81-A50F-4B2C-BFAC-564DDD8DA894.jpeg
    156.4 KB · Views: 5
  • E2E03103-1E16-4CE4-AD4A-38A162B997F6.jpeg
    E2E03103-1E16-4CE4-AD4A-38A162B997F6.jpeg
    135.5 KB · Views: 5
  • 6381F8F1-802E-45F4-AFD8-ACAC1530379D.jpeg
    6381F8F1-802E-45F4-AFD8-ACAC1530379D.jpeg
    157.6 KB · Views: 5
  • CA206539-C5AA-49FD-8EF3-D97C64D920F1.jpeg
    CA206539-C5AA-49FD-8EF3-D97C64D920F1.jpeg
    181.5 KB · Views: 5
  • Like
Reactions: Ant127
OP
Beowulfz07

Beowulfz07

Site Supporter
Jun 10, 2018
432
570
93
Wellingborough
OCD led fitted and none of the led strips worked due to conversion from ac to dc, luckily just a simple reverse of a couple of matrix connectors and all working.
Apron and shooter guard on, foil instruction cards too.
All coils etc tested.
Pinsound remix works and sounds like a new machine and the shaker works well too.
CPR mirror looks absolutely gorgeous.
Just a few tweaks to do once it’s had a few games on it
 

Attachments

  • 00574DC5-5C16-4F98-9D2D-3522E2F7C321.jpeg
    00574DC5-5C16-4F98-9D2D-3522E2F7C321.jpeg
    149.4 KB · Views: 6
  • E67111FE-D7AC-4A6C-82FC-777D4B973E69.jpeg
    E67111FE-D7AC-4A6C-82FC-777D4B973E69.jpeg
    167.2 KB · Views: 5
  • 646673B0-B838-4901-AEAB-94B3B60F435E.jpeg
    646673B0-B838-4901-AEAB-94B3B60F435E.jpeg
    218.8 KB · Views: 5
  • F2372FAA-6673-46E8-B580-6311B2E20B39.jpeg
    F2372FAA-6673-46E8-B580-6311B2E20B39.jpeg
    155.2 KB · Views: 5
  • 4E29FA40-7B70-4FEC-BF51-EE19B2489816.jpeg
    4E29FA40-7B70-4FEC-BF51-EE19B2489816.jpeg
    180.9 KB · Views: 5
  • 0ABA166D-186B-4A34-A4F2-EB764C49B9D0.jpeg
    0ABA166D-186B-4A34-A4F2-EB764C49B9D0.jpeg
    218.8 KB · Views: 4
  • 7E345C93-E202-4B9F-9936-4F21A283441F.jpeg
    7E345C93-E202-4B9F-9936-4F21A283441F.jpeg
    107.1 KB · Views: 4
  • 7A8CAD54-7EDD-43E7-A24F-121CA91DF55B.jpeg
    7A8CAD54-7EDD-43E7-A24F-121CA91DF55B.jpeg
    105.5 KB · Views: 5
  • CF52BDF3-908F-40F0-99DC-8C824056E0BE.jpeg
    CF52BDF3-908F-40F0-99DC-8C824056E0BE.jpeg
    89.5 KB · Views: 5
  • Like
Reactions: Ant127