Yes it does that 5v led goes from green to red to show the 5v line is to highI believe alltek boards have limited over current protection
Yes it does that 5v led goes from green to red to show the 5v line is to highI believe alltek boards have limited over current protection
Yeah I saw they will include a set of ROMs for free on request. But maybe it's all just easier with an Alltek. I'll have to wait until they come back in stock I guess, feel like a tube for not buying it the other week [emoji849]The eurodash board is designed/produced by Jamie at coinop king. You have to install the relevant game ROMS into it, so not as easy to use as the Alltek board.
https://www.coinopking.co.uk/pinballspareparts?category=Circuit+Boards
I'd definitely need to do something with it that's for sure. I wonder if I should sand to a smooth finish and then clear coat [emoji51] hopefully not making a dog's dinner of itLooking good [emoji106]
Some people have clear coat the whole area of the plunger , not done that myself though !!
Lightly sand with 1500 grit sandpaper carefully .I'd definitely need to do something with it that's for sure. I wonder if I should sand to a smooth finish and then clear coat [emoji51] hopefully not making a dog's dinner of it
Sent from my LE2113 using Tapatalk
Brilliant Ian. I'm already in talks with Andy about gets some more blubs ordered in for the pacmaze, so I'll ask him about this alsoI’d send Andy an email at pinball mania, he has loads of stuff not listed on his site.
people are always telling people to replace linear flippers but I’d stick with the originals I think...
failing Andy I’d try Dave at pinballhaze or Phil at pinball heaven
www.pinballmania.co.uk
https://www.facebook.com/Pinball-Daze-316896398383225/
www.pinball.do.uk
don’t know what’s going wrong with those links, might need to copy and paste
In the 'This Old Pinball' videos they just lay down some thick card cut to size over the windows and spray on the triple thick @PaulQuestion - What do people use to mask off windows etc before spraying... Anyone got a video of the process??
(I'm looking to use this not on a pin but an old 70's Brenco Silver Chest where the glass is _Just_ starting to go on the bottom...)
View attachment 136740
Damn... But no continuity? Crap just when I thought I'd maybe figured it out the issue. Not sure where to check now then.it should get hot. if it’s getting hot it’s working