Put a small light humidity gauge partially on the red paint, just moved it off and noticed it marked the paint. Put my nail onto it and it marked.
If I put the stencil on it’s going to mark it up which is probably what was happening before but it fixed itself
10 days that’s been on there, this paint is meant to be used in the desert
Better get this properly dry before the next electric increase!
Humidity has just dropped below 70%.
Just did a test with some masking tape and it has left a mark/residue like after the stencils were pulled off before
Think I might have to give up and get it into my room and let it cure as it’s going to be a bit stressful pulling the stencil off and seeing this, I will see if this mark disappears like the last lot did!
TBC…….
If I put the stencil on it’s going to mark it up which is probably what was happening before but it fixed itself

10 days that’s been on there, this paint is meant to be used in the desert

Better get this properly dry before the next electric increase!
Humidity has just dropped below 70%.
Just did a test with some masking tape and it has left a mark/residue like after the stencils were pulled off before

Think I might have to give up and get it into my room and let it cure as it’s going to be a bit stressful pulling the stencil off and seeing this, I will see if this mark disappears like the last lot did!
TBC…….