Right after a steady day yesterday it's on with a massive push today first thing is to don the welder and weld up all the broken scoops lucky enough I have a good relationship with a local garage and have use of there mig welder whenever I wantIn Progress TAF workshop
- Thread starter chris b
- Start date
Right after a steady day yesterday it's on with a massive push today first thing is to don the welder and weld up all the broken scoops lucky enough I have a good relationship with a local garage and have use of there mig welder whenever I want
That's pretty much everything back on the playfield a few wires of here and there and 2 diodes on the lamps gone and the receiver for the thing flip and all is good Right next thing into the backbox it was pretty tatty on the sides so I have another better one to swap over and that will get new decals and go on to a super minter
Next sort out the operator board hack the gi connectors must be the no one bodge for operators check the pics out
That's better nice proper repair on the board with new pins no jumpers needed either
Now on to the fe male connector I think this molex tool I bought from pinball heaven is one of the best pinball tools I have ever bought along with my magnetic nut driver setThat's the all the repairs done and the new backbox and speaker panel on 
Nice work buddy.
Come and shop mine when your done Chris.
In fact I'll swap you.
In fact I'll swap you.
now in tums arcade thanks for all the nice comments and likes
