Here we go.
Hold on here comes the speed hare:
![Rabbit :rabbit2: 🐇](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f407.png)
Received this morning, unfortunately it arrived DOA. Diagnostic errors and no display on the DMD. Have agreed to look at it post cabinet work.
Project details:
Expanded Scope of works so far:
Playfield Strip and general restoration of ramps and playfield. Treat existing plastics etc.
Diagnose and hopefully resolve DMD issue/errors.
Here she is:
![PXL_20220915_072837758.jpg PXL_20220915_072837758.jpg](https://www.pinballinfo.com/community/data/attachments/181/181091-5ab572d7a163ea86248d60adefe7f211.jpg)
After trying to test it and relaying the DMD issue etc I wasted no time stripping it down and patching holes/repairing cuts and dents.
Back box had Latch damage to the bottom, pretty severe.
![PXL_20220915_072842817.jpg PXL_20220915_072842817.jpg](https://www.pinballinfo.com/community/data/attachments/181/181090-bf87fb39d3cdf8ff03a1f2e6f4782d56.jpg)
Guides on the back looked 'OK' but i'm going to patch them up and make them look better:
![PXL_20220915_072846923.jpg PXL_20220915_072846923.jpg](https://www.pinballinfo.com/community/data/attachments/181/181089-ebbe032baf741b0d08510fb2ac530b27.jpg)
![PXL_20220915_072849209.jpg PXL_20220915_072849209.jpg](https://www.pinballinfo.com/community/data/attachments/181/181088-4cdf191595e3ee14c2e7ab7d4dbeee60.jpg)
Began the wood filling journey:
![PXL_20220915_075525939.jpg PXL_20220915_075525939.jpg](https://www.pinballinfo.com/community/data/attachments/181/181087-00a622e713b65009b2271e11bc5bcf71.jpg)
![PXL_20220915_075528330.jpg PXL_20220915_075528330.jpg](https://www.pinballinfo.com/community/data/attachments/181/181086-67efa5569ff0d6f1dc0c3756f5ab4b44.jpg)
![PXL_20220915_075531612.jpg PXL_20220915_075531612.jpg](https://www.pinballinfo.com/community/data/attachments/181/181085-3ed032009adb3274bc1a6ff35cbd894d.jpg)
![PXL_20220915_075533466.jpg PXL_20220915_075533466.jpg](https://www.pinballinfo.com/community/data/attachments/181/181084-bb705890c3a754238cb5dd979a2011bc.jpg)
![PXL_20220915_075540203.jpg PXL_20220915_075540203.jpg](https://www.pinballinfo.com/community/data/attachments/181/181083-f903dc40efb562587e2e12d4a30d6b9b.jpg)
![PXL_20220915_075542115.jpg PXL_20220915_075542115.jpg](https://www.pinballinfo.com/community/data/attachments/181/181082-76ac65d33c224d176cf6bf6b1a0e7153.jpg)
Packed up the new rails, legs and lock bar. Along with the existing Hinges and Coin door frame. Took my lock bar as client wants the same powder coat as mine.
![PXL_20220915_090851137.jpg PXL_20220915_090851137.jpg](https://www.pinballinfo.com/community/data/attachments/181/181081-cd86e6100f4ca22d1ccd2bff068f3045.jpg)
Sanded down area's and built up another layer when I got back:
![PXL_20220915_135057773.jpg PXL_20220915_135057773.jpg](https://www.pinballinfo.com/community/data/attachments/181/181077-c40d29dd7255c00c933d17a23dbd613c.jpg)
![PXL_20220915_135100860.jpg PXL_20220915_135100860.jpg](https://www.pinballinfo.com/community/data/attachments/181/181076-e340407a11ccb31a24e0260767b3d6f1.jpg)
![PXL_20220915_135103285.jpg PXL_20220915_135103285.jpg](https://www.pinballinfo.com/community/data/attachments/181/181075-26afce8d04b66631437bbb431368dfa9.jpg)
![PXL_20220915_142050519.jpg PXL_20220915_142050519.jpg](https://www.pinballinfo.com/community/data/attachments/181/181073-90dbb10f1d9f3921ce763c02b08ac253.jpg)
![PXL_20220915_142103595.jpg PXL_20220915_142103595.jpg](https://www.pinballinfo.com/community/data/attachments/181/181069-26b664f4dca63e2a3ba3b3e7ea0ccdbb.jpg)
Hold on here comes the speed hare:
![Rabbit :rabbit2: 🐇](https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f407.png)
Received this morning, unfortunately it arrived DOA. Diagnostic errors and no display on the DMD. Have agreed to look at it post cabinet work.
Project details:
- Cabinet Prep
- New Cabine Decals
- Powder Coated Rails, Legs, Hinges, Coin door frame and Lock Bar
- Installation of new parts (Pinsound Plus etc.)
- Custom Speaker Panel Artwork
- Custom Backglass Artwork
Expanded Scope of works so far:
Playfield Strip and general restoration of ramps and playfield. Treat existing plastics etc.
Diagnose and hopefully resolve DMD issue/errors.
Here she is:
![PXL_20220915_072837758.jpg PXL_20220915_072837758.jpg](https://www.pinballinfo.com/community/data/attachments/181/181091-5ab572d7a163ea86248d60adefe7f211.jpg)
After trying to test it and relaying the DMD issue etc I wasted no time stripping it down and patching holes/repairing cuts and dents.
Back box had Latch damage to the bottom, pretty severe.
![PXL_20220915_072842817.jpg PXL_20220915_072842817.jpg](https://www.pinballinfo.com/community/data/attachments/181/181090-bf87fb39d3cdf8ff03a1f2e6f4782d56.jpg)
Guides on the back looked 'OK' but i'm going to patch them up and make them look better:
![PXL_20220915_072846923.jpg PXL_20220915_072846923.jpg](https://www.pinballinfo.com/community/data/attachments/181/181089-ebbe032baf741b0d08510fb2ac530b27.jpg)
![PXL_20220915_072849209.jpg PXL_20220915_072849209.jpg](https://www.pinballinfo.com/community/data/attachments/181/181088-4cdf191595e3ee14c2e7ab7d4dbeee60.jpg)
Began the wood filling journey:
![PXL_20220915_075525939.jpg PXL_20220915_075525939.jpg](https://www.pinballinfo.com/community/data/attachments/181/181087-00a622e713b65009b2271e11bc5bcf71.jpg)
![PXL_20220915_075528330.jpg PXL_20220915_075528330.jpg](https://www.pinballinfo.com/community/data/attachments/181/181086-67efa5569ff0d6f1dc0c3756f5ab4b44.jpg)
![PXL_20220915_075531612.jpg PXL_20220915_075531612.jpg](https://www.pinballinfo.com/community/data/attachments/181/181085-3ed032009adb3274bc1a6ff35cbd894d.jpg)
![PXL_20220915_075533466.jpg PXL_20220915_075533466.jpg](https://www.pinballinfo.com/community/data/attachments/181/181084-bb705890c3a754238cb5dd979a2011bc.jpg)
![PXL_20220915_075540203.jpg PXL_20220915_075540203.jpg](https://www.pinballinfo.com/community/data/attachments/181/181083-f903dc40efb562587e2e12d4a30d6b9b.jpg)
![PXL_20220915_075542115.jpg PXL_20220915_075542115.jpg](https://www.pinballinfo.com/community/data/attachments/181/181082-76ac65d33c224d176cf6bf6b1a0e7153.jpg)
Packed up the new rails, legs and lock bar. Along with the existing Hinges and Coin door frame. Took my lock bar as client wants the same powder coat as mine.
![PXL_20220915_090851137.jpg PXL_20220915_090851137.jpg](https://www.pinballinfo.com/community/data/attachments/181/181081-cd86e6100f4ca22d1ccd2bff068f3045.jpg)
Sanded down area's and built up another layer when I got back:
![PXL_20220915_135057773.jpg PXL_20220915_135057773.jpg](https://www.pinballinfo.com/community/data/attachments/181/181077-c40d29dd7255c00c933d17a23dbd613c.jpg)
![PXL_20220915_135100860.jpg PXL_20220915_135100860.jpg](https://www.pinballinfo.com/community/data/attachments/181/181076-e340407a11ccb31a24e0260767b3d6f1.jpg)
![PXL_20220915_135103285.jpg PXL_20220915_135103285.jpg](https://www.pinballinfo.com/community/data/attachments/181/181075-26afce8d04b66631437bbb431368dfa9.jpg)
![PXL_20220915_142050519.jpg PXL_20220915_142050519.jpg](https://www.pinballinfo.com/community/data/attachments/181/181073-90dbb10f1d9f3921ce763c02b08ac253.jpg)
![PXL_20220915_142103595.jpg PXL_20220915_142103595.jpg](https://www.pinballinfo.com/community/data/attachments/181/181069-26b664f4dca63e2a3ba3b3e7ea0ccdbb.jpg)