Here we go.
Hold on here comes the speed hare:

Received this morning, unfortunately it arrived DOA. Diagnostic errors and no display on the DMD. Have agreed to look at it post cabinet work.
Project details:
Expanded Scope of works so far:
Playfield Strip and general restoration of ramps and playfield. Treat existing plastics etc.
Diagnose and hopefully resolve DMD issue/errors.
Here she is:

After trying to test it and relaying the DMD issue etc I wasted no time stripping it down and patching holes/repairing cuts and dents.
Back box had Latch damage to the bottom, pretty severe.

Guides on the back looked 'OK' but i'm going to patch them up and make them look better:


Began the wood filling journey:






Packed up the new rails, legs and lock bar. Along with the existing Hinges and Coin door frame. Took my lock bar as client wants the same powder coat as mine.

Sanded down area's and built up another layer when I got back:





Hold on here comes the speed hare:

Received this morning, unfortunately it arrived DOA. Diagnostic errors and no display on the DMD. Have agreed to look at it post cabinet work.
Project details:
- Cabinet Prep
- New Cabine Decals
- Powder Coated Rails, Legs, Hinges, Coin door frame and Lock Bar
- Installation of new parts (Pinsound Plus etc.)
- Custom Speaker Panel Artwork
- Custom Backglass Artwork
Expanded Scope of works so far:
Playfield Strip and general restoration of ramps and playfield. Treat existing plastics etc.
Diagnose and hopefully resolve DMD issue/errors.
Here she is:

After trying to test it and relaying the DMD issue etc I wasted no time stripping it down and patching holes/repairing cuts and dents.
Back box had Latch damage to the bottom, pretty severe.

Guides on the back looked 'OK' but i'm going to patch them up and make them look better:


Began the wood filling journey:






Packed up the new rails, legs and lock bar. Along with the existing Hinges and Coin door frame. Took my lock bar as client wants the same powder coat as mine.

Sanded down area's and built up another layer when I got back:




