Do you ever use novus 3 on pf's?
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Wanted Black Knight 2000
- Thread starter JMP
- Start date
I wouldn't use water with it especially on a pre diamond plate pf. Use IPA (not Greene King;-) as a lubricant. Available from Maplin.
Novus 2 or spit works well. Be careful as warned, you can easily start to remove paint.
You wouldn't put that on the play field anyway, you would be drinking it.
This little lot should sort the mylar/ glue out.
left to right
ipa maplins £14 they do a sparay version cheaper too
magic eraser morrisons £4.99
sticky stuff remover £3ish b&q
sel freez ebay £5ish
evo stick adehsive remover b&q (on the shelf) £3ish
nouvos 2 mexico £92 pesos
The best results were the sticky stuff remover to soften the glue up and scrape excess away, then magic eraser with the ipa to remove the last residue. The evo stick stuff didnt seem to do much at all and it evaps quicker than you can use it.
left to right
ipa maplins £14 they do a sparay version cheaper too
magic eraser morrisons £4.99
sticky stuff remover £3ish b&q
sel freez ebay £5ish
evo stick adehsive remover b&q (on the shelf) £3ish
nouvos 2 mexico £92 pesos
The best results were the sticky stuff remover to soften the glue up and scrape excess away, then magic eraser with the ipa to remove the last residue. The evo stick stuff didnt seem to do much at all and it evaps quicker than you can use it.
Attachments
That evostik adhesive remover on a bit of magic eraser is the business for removing the adhesive under Mylar once you have freeze sprayed and removed the Mylar.
try an area first etc though as it is fairly lethal stuff and could lift the paint etc
try an area first etc though as it is fairly lethal stuff and could lift the paint etc
The Evo stick always used to be behind the counter. I also noticed its on the shelf now in b&q laws must of changed now
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Heres a link to my prob as disscussed over on pinside. The pics look the same as mine.
http://pinside.com/pinball/forum/topic/black-knight-2000-mylar-removal-ok-inserts-still-ugly
http://pinside.com/pinball/forum/topic/black-knight-2000-mylar-removal-ok-inserts-still-ugly
Its now on the shelves because they have changed the recipe of the glue.
You can't get high of it now. Still stinks though.
Took them long enough, the Dunlop stuff we use u can still get high on gives you a pounding head
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
OP
OP
Yep, got my beady eye on it.
Everyone else, hands off !!How's the refurb coming Gaz?
OP
OP
Looking better than when I last saw it !
looking lovely, are you bringing that to the wedding of our esteemed Administrator?
i'd play that even if it was on £2 for 3 goes, especially after i get ****ed
If Dan's going with his Mrs can you really see him getting drunk ?
NO.
She will be keeping a check on him for sure.
Sorry pal but you know she only does it because she loves you really.
NO.
She will be keeping a check on him for sure.
Sorry pal but you know she only does it because she loves you really.
Even though it is my wedding, I plan to help run distraction for Dan to keep him out of harms way. :eyebrows:
