Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
In Progress Firepower Shop Log
- Thread starter RudeDogg1
- Start date
OP
OP
no it all helps peter I dunno wether its because im dyslexic I just find the wiring diagrams confusing
OP
OP
just a small update the back box restore is pretty much complete just needs a coat of clear. Im quite impressed its come out ok
Before
After
Red coat
Before
After
Red coat
Whoaa. Good work Rudi!
OP
OP
Latest haul of parts has arrived. Abit ****ed because the ball gate flap replacent is the wrong bloody size. Does anyone have one knocking about I can buy off you?
did it swerve customs??
OP
OP
Did it hell ive been stung twice this week robbing bastards. Marco £61 and bay area (for the wire) £21
OP
OP
So a lil progress on the cab restore today. My replacement front and back panel that jagman so kindly cut and routed for me arrived so it was off with the damaged front and crumbling chipboard back. I also replaced the manky damaged base.
- Joined
- Jul 21, 2011
- Messages
- 11,336
- Alias
- Ive
I imagine your neigbours thinking ...whats he building in there ??
Great work Rudi. Looks fantastic
OP
OP
Cheers gaz she's getting there. Still not looking forward to working out where the flipper wires should be
Great work that man, backbox looks superb!
I've got a few spare gates kicking about, do you know what size you need or what it looks like?
I've got a few spare gates kicking about, do you know what size you need or what it looks like?
OP
OP
Cheers Steve that means a lot coming from you with your quality of restores.
Here's the gate gutted I snapped the tab it tumbled up lovely.
Also retro fitted the new targets so they have the old style mounting brackets on.
Just need to put the bullseyes on 4
Here's the gate gutted I snapped the tab it tumbled up lovely.
Also retro fitted the new targets so they have the old style mounting brackets on.
Just need to put the bullseyes on 4
OP
OP
Re drilling cab for leg bolts = a mother effing bitch! Something I'm hoping I don't have to do again ever
Think I've decided I want to buy this off you when you're bored of it. 
OP
OP
lol k jmp has first dibs
OP
OP
Just finished bullet proofing the power board
Just read on the Aussie forum that a small run of Firepower bumper caps has been done....
http://www.aussiepinball.com/index.php?topic=11814.0
http://www.aussiepinball.com/index.php?topic=11814.0
Or direct EBay link in case you don't have an account on the Aussie forum..
http://pages.ebay.com/link/?nav=item.view&id=231139650083
http://pages.ebay.com/link/?nav=item.view&id=231139650083
OP
OP
Found some yesterday actually PP have got classic arcades to produce them. Thanks anyway
OP
OP
OP
OP
More board bullet proofing
Starting to look toasty off with them
Upgraded transistors chunky resistor no longer required. 0 ohm resistors used instead of jumpers.
Starting to look toasty off with them
Upgraded transistors chunky resistor no longer required. 0 ohm resistors used instead of jumpers.
Whats looking toasty ?
That transistor bottom left looks like it's legs are shorting out!!!
They do look a little twisted don't they.
OP
OP
Red resistor nearly black
OP
OP
Fook knows y they are so twisted, straightened now
OP
OP
No more batteries
Whats the difference in spec of the transistors?
