Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I’m not sure ,maybe bigIan does .
I had a problem with my fishtales when I had it ,there was a humb and no music .it turned out to be a ground .
But yeah if I can get that sound board tested that would get the possibilities down a bit
It doesn’t do anything when that switch is pressed .
I think I will change some more connectors and see it that helps ,as the lights aren’t going in any sequence either .
It was the flipping connector that I had replaced going to the mpu that was causing the flipper problem .so at least it’s sorted again
Those wee connectors are a nightmare !
Just an update on this and maybe more ideas
At the min it will play without sound .lights no t sequencing but staying lit ,and score boards have gone
All Boards tested working ( sound board untested as yet )
I’m getting 5 v at lamp driver board
But not getting a steady voltage at the scoreboards
Any ideas what to try next ,ive changed a few
Connectors and rubbed a few others with sand paper ,those connectors are a nightmare !