williams

So I've got a Getaway which I'm busy trying to repair and the wiring to the ball trough switches are an absolute mess. Somebody really did a job on it Could anyone with a working Getaway take and post up some photos of the playfield underside, showing the wiring to the ball trough switches...

Hi all, Just a bit of shameless self-promotion... (Content is still worth it though, I hope!) Let me know what you think in the comments! (And well if you do kind of like it, subscribe! There's much more to come!)

Hello! Moving house so alas must sell Judge Dredd Pros: - Flippers Rebuilt - LEDs installed - Topper - Dead World Mod Installed (will also supply originals which can be fitted on request) - Upgraded Speakers (see pics) - DMD in great condition, with DMD saver board installed. - Ball trough...

I have The Getaway, I was fitting some LEDs etc and a screw fell down through the underside of the playfield not to be seen for a while. After switch on the plunger didn`t work, not knowing about the screw I checked the vio/org, yel/brn & blk 0v cables going to the plunger coil and up to the...

Can anyone shed some light on this. I had the bottom line out on my Getaway DMD, I soldered it twice but it only lasted an hour or so. Reading around I did the dremel attack on it carving out the glass to do the link with conductive paint. When I was working on it I exposed the faulty contact...

Only selling due to buying my Tron last week. I'll regret selling this but I can't justify more than one pin at the moment. This is a nice example of a T2. A playfield refurb was done approximately 4 years ago. Lots of new plastics and refurbished metal parts. LED's are mainly Premiums for the...

Superb pinball history article! http://backglass.org/williams/tlpdohw/expo2016/

there seems to be a real shortage of congo plastics, even full sets are sold out around the world. If any one could provide hi res scans then I will have a go at making some, or the real parts would be good. Cheers This one is the most sort after, has been sold recently at pinball center...

Hi =) Has anyone got or know of a Williams High Speed 2 for sale soon? Dont mind the condition too much as I've previously had one, I'd prefer working. Thankyou =)

Hi, I have a sticky flipper on my Williams Barracora. At first cursory inspection it seems the piston is getting slightly stuck in the coil and doesn't move in and out freely. No sign of overheating. My first thought is to replace the coil sleeve. My question is: are all coil sleeves the same...

Hi anyone in the UK or local selling a coin door for a WPC or data east cabinet? Thanks.

Hi there. I am the proud owner of a Williams Post Time pinball and I would like to know if the plastics are the same as the Williams Paddock. I would like to get some spare plastics for my machine and any other spares available. Thanks Martyn

Hi I am looking for a Williams Narrow body lockdown bar. Its for a virtual pin diy project. Forgive the Photos I know you guys are experts but just wanted to show examples of what bits plus save anyone time sending offers for alternative stuff. I also need: 4x Legs 4x bolts 4x levelers...

This is what my fishtales dotmatrix looks like ,you can still see it changing displays etc It was ok until I borrowed the ribbon cable to try on another machine .ive tried a different ribbon cable and reseating all the other cables .is this pointing at a dodgy control board ,can these be picked...

After buying my first machine a few months ago I'm already after no2 :p I've decided I'd quite fancy a Terminator 2. I love the movie and with owning an Addams Family it will set a nice 90's movie theme in the games room. So if anyone is thinking of selling or knows someone that is or might...