Zinc plated hex head 1/4” drive screws for playfields

myPinballs

Well-Known Member
Nov 19, 2011
2,878
2,159
113
43
Pudsey UK
www.mypinballs.com
I may have found a good new supply for the common 1/4” hex head screws (non slotted) used on all wpc playfields

These will be proper 1/4” head (not metric like previous attempts) and varying lengths including the very well used #6 1/2” and #8 1/2”

I have some test ones coming. If they work out good I’ll be listing them for sale for others. They are direct from the USA

Best thing for restorations. Bin all your old ones!

245D0443-F5E8-4580-A531-20DBA2F01531.jpeg
 
OP
OP
myPinballs

myPinballs

Well-Known Member
Nov 19, 2011
2,878
2,159
113
43
Pudsey UK
www.mypinballs.com
Well , they arrived a day early and yes they are awesome. Exact replacements. Using them in my whitewater restoration. 1/4" head fits std nut driver nicely

Test examples are

#6 half inch
IMG_3692.JPG

#8 half inch

IMG_3695.JPG

And #8 inch and a half

IMG_3694.JPG

Will be working out pricing shortly. Will be in sets of 20. Will see what other sizes I can get but register your interest for the 1/2" #6 and #8 ones now
 
Last edited:
  • Like
Reactions: Paul

PBrookfield

Resident Uneconomical Repair Representative
Mar 23, 2017
814
428
63
Wolverhampton, UK
I'll buy all of them.

...what do you mean 'don't be a dick'? Oh alright then. One set of each for me please... if there's any left!!!
 
OP
OP
myPinballs

myPinballs

Well-Known Member
Nov 19, 2011
2,878
2,159
113
43
Pudsey UK
www.mypinballs.com
Price is going to be £2.40 for 20 or £12 for 100 of the 1/2" length types

The longer 1 1/2" ones will be £4.80 for 20.

inc vat, plus postage.

I also should have #6 3/8" length soon to (the type for bulb holders and other thin metal. Std zinc plating type though not yellow zinc plating)
 

RudeDogg1

Well-Known Member
Dec 27, 2012
7,953
1,612
113
40
Barnstaple, Devon
Don’t send me an invoice yet I’ve got a few things I want off you and we can knock what I’d owe you off your repaint if you want that is
 
OP
OP
myPinballs

myPinballs

Well-Known Member
Nov 19, 2011
2,878
2,159
113
43
Pudsey UK
www.mypinballs.com
Also, one other thing, for the pinball 2000 lovers out there (like me!!), i got hold of the original #8 1/2" ones used on this era of game with the philips cross in the centre of the hex head. I think these are just for pinball2000 but are also handy for when you lose your nut driver!!