T
toastyhamster
Got hold of a W?D and the middle reel has problems. At first I thought it was the motor, but that was all clean, then I thought it was warped but actually it's pretty straight, turns out that it sits great on the motor spindle until the set screw is tightened, at which point it tightens well out of line and fouls the opto. So, I think I have two options:
1. Blob of epoxy on the spindle end holding the reel in place with the set screw loose - not sure this would be reversible and I know these reels are unobtainium
2. File a flat on the spindle for the set screw to hold to - not sure this will work as the plastic is just about strong enough to hold the set screw as it is so it might not change anything, but is a harmless option
3. Give up and pay Andy to fix it
Anybody been through this pain?
1. Blob of epoxy on the spindle end holding the reel in place with the set screw loose - not sure this would be reversible and I know these reels are unobtainium
2. File a flat on the spindle for the set screw to hold to - not sure this will work as the plastic is just about strong enough to hold the set screw as it is so it might not change anything, but is a harmless option
3. Give up and pay Andy to fix it
Anybody been through this pain?