What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Tight row of pinball machines against a wall

DRD

DRD

Site Supporter
2 10 Years
Joined
Oct 26, 2014
Messages
5,568
Location
Newark
How do you achieve this in practice please ?

Is it a case of grovelling under the machine and pushing it up with your back to move it ?

Or do folk buy hydraulic platform trucks to do the heavy lifting ? At about £200 new, I am reluctant to buy one

Thanks
 
used to use my back until i bought a quad bike lift, although you will need to get some timber to get the height, this fits completely under the pin so can lift with the backboard up
 
I'm currently of the broken back persuasion, but would be interested in a scissor lift if only to save against future wheelchair bills.

Anyone know of a decent one in the sub £200 bracket?
 
i have a lift trolley and two butlers, but don't underestimate the turtle method as it isn't actually that heavy if you balance the weight properly between your four limbs, and the fine movements are easier. i generally get my first butler to position the trolley, my second butler to trolley it in til it's nearly there, then the final few centimetres here and there i do by turtle.

gif turtle-helps-friend.gif gif turtle-vs-crocs.gif
 
I use this. It's a pool table lift bastardised with some wooden blocks and a sheet of mdf. It's crude but gets the job done

image.jpg
 
DRD said:
How do you achieve this in practice please ?

Is it a case of grovelling under the machine and pushing it up with your back to move it ?

Or do folk buy hydraulic platform trucks to do the heavy lifting ? At about £200 new, I am reluctant to buy one

Thanks
Click to expand...
Would be £200 well spent. When you've got them packed in and you want to shuffle them about, a hydraulic lift trolley makes it so much easier.
 
DRD said:
How do you achieve this in practice please ?

Is it a case of grovelling under the machine and pushing it up with your back to move it ?

Or do folk buy hydraulic platform trucks to do the heavy lifting ? At about £200 new, I am reluctant to buy one

Thanks
Click to expand...


yuo,demented turtle time for me.No biggie.
you can also get those three wheeled castors as a cheap "helper"
 
carl lawrence said:
Well I lie on my back and lift the machine up with hands and knees !!

Always felt if I did it the over way ,my back may go through the bottom of the cab !
Click to expand...

That sounds a lot harder Carl. Its actually quite easy on all fours, even my RFM gets moved this way and it seems twice as heavy as the others.
 
Turtle technique for me! Spend £200 on a trolley? Me? The KING OF BUDGET could buy at least another 2 knackered project pins for that ;)
 
get a scissor trolley with a fold down handle. Mine's a PITA to store as it doesn't fold down. It makes machines a piece of **** to move but I still end up not using it sometimes as it's a heavy ****er in it's own right
 
kevlar said:
That sounds a lot harder Carl. Its actually quite easy on all fours, even my RFM gets moved this way and it seems twice as heavy as the others.
Click to expand...
Being 6ft for some reason it seems easyer for me becouse I slide the machine,to its spot.
But just because I find it easy doing it that way,does not mean it is eaay for over people.:thumbs:

Another way is to put plastic like casters under the legs!! And you can just push the machine where you need it !,
 
I get spoilt at the Haslingden arcade, as Andy has a proper hydraulic lift table, which is an absolute godsend for moving machines.

As others have pointed out, they are very heavy though, and if they don't have a folding handle, you need to find somewhere to store them
 
You must log in or register to reply here.
Back
Top Bottom