What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Thank You.

Big thanks to @stumblor for the mod splitter board and plugs for my TAF refurb. Although not made for a Bally/ Williams it’s a perfect way to connect all my add ons and mods, it enables me to have a 12v 5v right in the middle of the playfield.
 

Attachments

  • IMG_6146.jpeg
    IMG_6146.jpeg
    213.1 KB · Views: 25
Shout out @jonathan for finding me a really nice example EATPM.
Totally original but perfect Ramp and lovely PF which is fully mylared.
Has a few issues, needs a good clean / tidy and cab is past its best but fair price considering its nice condition.

🙏
 
Big thank you to @Jmac and everyone at the league meet.
Jon hosted a league meet at his place and raised a very respectable amount of money for sarcoma u.k which as most of you know is a very rare cancer, the cancer I’m battling.
See you soon Jon, I owe you a large beer.

Thank you
Alan
 
Thanks to Jim @myPinballs for repairing my Pinotaur power driver board, one of the coils locked on while beta testing for Spooky. It took Spooky 3 weeks after my event (I told them) to realise it was their beta update at fault! I wonder how many pins were cooking💥Luckily I knew something was up so shut it down before the damage got really bad.

I don’t love the smell of burning coils in the morning😂

While he was there he found out why my shaker was playing up (I never even mentioned that) the shaker mosfet was gone too. Not because of the beta code but something else as it hadn’t worked for a while and I thought I had unplugged it but the fuse on the little shaker board had blown.

Was fun getting that board out then back in, thankfully it can be repaired😎
 

Attachments

  • CD72AA33-6623-4507-8F67-9EAECFF57DF0.jpeg
    CD72AA33-6623-4507-8F67-9EAECFF57DF0.jpeg
    101.8 KB · Views: 23
  • IMG_2787.jpeg
    IMG_2787.jpeg
    191.4 KB · Views: 20
  • IMG_2793.jpeg
    IMG_2793.jpeg
    137.4 KB · Views: 22
  • IMG_9594.jpeg
    IMG_9594.jpeg
    170.3 KB · Views: 23
  • IMG_9709.jpeg
    IMG_9709.jpeg
    149.9 KB · Views: 25
Thank you Col for the thoughtful advice and comments when I've been in contact with you.

I hope you read this as I thoroughly understand how being excluded from this community is not good for your mental well being and health, given that you love to be involved in so many ways bringing both enthusiasm and experience.

Please do not let this eat into your soul and send you to a dark place, it's only a forum. Hope you stay in touch.

Ian
 
A huge thank you to @Ragnar1057 for a super fast, diagnosis and repair to my ailing TAF power board.

After initial remote fault finding, I posted board to Simon - he received Mon day, fixed on Tuesday, back in my TAF today, Wednesday.

Photos before and after along with recommendations and advice. Outstanding work and very reasonable charges.

:)
 
Huge thanks to @Balazs - when he saw I was after a Zacc Time Machine backglass he knew a seller in Hungary had one but he didn’t just put me in touch with him, he went to the sellers house himself and chose the better glass (the seller had two) keeping in touch with me on WhatsApp to make sure I was happy, he then packaged it up himself (amazingly well - bubble wrap, polystyrene, strong box) and even arranged the shipping to the UK.

This time and effort was all to help a fellow pinhead, with no other benefit to him.

Sometimes on here there are threads where offence is taken over a comment made, or someone is called woke or similar, and it’s all a bit disappointing on a forum where everyone should be enjoying their shared love of pinball - but Baz really has embodied all that’s best about Pinballinfo!

Thanks Baz! :)

IMG_3317.jpeg
 
You must log in or register to reply here.
Back
Top Bottom