What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Sold Stern Spiderman

M

marcevans

Site Supporter
5Years
Joined
Oct 25, 2017
Messages
36
Location
newcastle upon tyne
Stern Spiderman £2800.
Fully working, perfect dot matrix, no broken plastics, etc. Led's throughout including all flashers.
Some wear at the magnet area (see picture) and a small chip bottom right side of back box.
I am located in Newcastle, 5 minutes from the airport.
Contact me on here, on my email marcevans11@aol.com or mobile 07899 902954.
Thanks
Marc.
 

Attachments

  • IMG_2626.JPG
    IMG_2626.JPG
    112 KB · Views: 133
  • IMG_2627.JPG
    IMG_2627.JPG
    67.9 KB · Views: 119
  • IMG_2628.JPG
    IMG_2628.JPG
    82.2 KB · Views: 119
  • IMG_2629.JPG
    IMG_2629.JPG
    78.8 KB · Views: 116
  • IMG_2630.JPG
    IMG_2630.JPG
    93.7 KB · Views: 115
  • IMG_2631.JPG
    IMG_2631.JPG
    95.7 KB · Views: 118
  • IMG_2632.JPG
    IMG_2632.JPG
    123.8 KB · Views: 125
  • IMG_2633.JPG
    IMG_2633.JPG
    110.2 KB · Views: 120
  • IMG_2634.JPG
    IMG_2634.JPG
    81.7 KB · Views: 129
  • IMG_2635.JPG
    IMG_2635.JPG
    151.4 KB · Views: 124
  • IMG_2636.JPG
    IMG_2636.JPG
    127.3 KB · Views: 119
  • IMG_2637.JPG
    IMG_2637.JPG
    151.1 KB · Views: 109
marcevans said:
Stern Spiderman £2800.
Fully working, perfect dot matrix, no broken plastics, etc. Led's throughout including all flashers.
Some wear at the magnet area (see picture) and a small chip bottom right side of back box.
I am located in Newcastle, 5 minutes from the airport.
Contact me on here, on my email marcevans11@aol.com or mobile 07899 902954.
Thanks
Marc.
Click to expand...
Good price Marc!! NOw if only I hadn't just bought a Dialled In !!

Cheers

kev
 
  • Like
Reactions: ski
First thing you need to do is:

A> rip out those LEDs and replace with bulbs.
OR
B> add an LED OCD board.
---
C> doing nothing; will leave you with non-standard lighting on a game where subtleties in the insert lighting is a design feature.
 
Monkeyboypaul said:
First thing you need to do is:

A> rip out those LEDs and replace with bulbs.
OR
B> add an LED OCD board.
---
C> doing nothing; will leave you with non-standard lighting on a game where subtleties in the insert lighting is a design feature.
Click to expand...
I am going to need some help and advice when it arrives.
Led OCD board what, where, how?
Up to date non toby etc. plastics supplier please
How to prevent further wear to magnet, cliffy? where will I get one or is it too late?
Do I need a shaker motor what ,how, where?
Do you recommend a multi colour dot matrix
Anything else to make it cooler?

Do any of you guys go to work?

I wanted one fully loaded, but I just had to do it. you know how it is.
 
Monkeyboypaul said:
First thing you need to do is:

A> rip out those LEDs and replace with bulbs.
OR
B> add an LED OCD board.
---
C> doing nothing; will leave you with non-standard lighting on a game where subtleties in the insert lighting is a design feature.
Click to expand...

Or just play it and see if you even notice what above comment is talking about, it never bothered me on mine and I'm pretty anal about my machines.
 
Do need incandescents on 4 inserts as they go through different stages of brightness and LED's won't replicate..... presume unless you use OCD board which I know nothing about!
 
Tombyrne said:
I am going to need some help and advice when it arrives.
Led OCD board what, where, how?
Up to date non toby etc. plastics supplier please
How to prevent further wear to magnet, cliffy? where will I get one or is it too late?
Do I need a shaker motor what ,how, where?
Do you recommend a multi colour dot matrix
Anything else to make it cooler?

Do any of you guys go to work?

I wanted one fully loaded, but I just had to do it. you know how it is.
Click to expand...

Just play it before you spend any cash on it. Your quoted shopping list could amount around £500 already.



Sent from my iPad using Tapatalk
 
Tombyrne said:
I am going to need some help and advice when it arrives.
Led OCD board what, where, how?
Up to date non toby etc. plastics supplier please
How to prevent further wear to magnet, cliffy? where will I get one or is it too late?
Do I need a shaker motor what ,how, where?
Do you recommend a multi colour dot matrix
Anything else to make it cooler?

Do any of you guys go to work?

I wanted one fully loaded, but I just had to do it. you know how it is.
Click to expand...
http://www.pinballinfo.com/communit...-it-do-do-i-need-one.37377/page-2#post-224780
 
Tombyrne said:
I am going to need some help and advice when it arrives.
Led OCD board what, where, how?
Up to date non toby etc. plastics supplier please
How to prevent further wear to magnet, cliffy? where will I get one or is it too late?
Do I need a shaker motor what ,how, where?
Do you recommend a multi colour dot matrix
Anything else to make it cooler?

Do any of you guys go to work?

I wanted one fully loaded, but I just had to do it. you know how it is.
Click to expand...

LED OCD: http://ledocd.com/ (you'll have to source one elsewhere, as @stoptap suggested, as Herg won't ship internationally)
Regular Bulbs (to replace the LEDs): https://www.onestoppinball.co.uk/products/555-bulbs
Non-Toby Plastics: http://www.backalleycreations.com/bac spiderman pinball addons.html
Cliffy: https://www.onestoppinball.co.uk/products/carbon-fibre-magnet-ring-cliffy-protector (get the 2nd from left in Carbon Fibre)
Shaker: https://www.pinball.co.uk/shop/spares-accessories/shaker-motor-kit-502-5027-00/ (SAM option), @Sven Normansson also makes them in small batches from time-to-time.
ColorDMD: http://www.pinballdisplays.co.uk/product-p/spidy-colordmd.htm (Spidey is one of my least favourites in Colour, but still a big improvement over Orange)
Cool: https://pinside.com/pinball/forum/t...der-coated-machines-here/page/12#post-3256053

Yes, harder than i really should for my salary.

You can always sell it later and get another.
 
Well that's my weekend sorted!
Thank you so much for all your help.
Managed to source my Rocky on this site (never thought that would happen).
Also Big Brave Back glass and spares
And now a Spidey.
If I've got anything left after I've been Spidey shopping I will send a donation to the site.
Regards, Tom

( Non-Toby Plastics lol).
 
Tombyrne said:
Now then, you have opened up a can of worms as I work in the Glass industry......... got a meeting this afternoon with a glass toughening plant and will see what they can come up with.
Click to expand...

http://www.pinballdecals.com/NonGlareOpticalGlassPage.html

^^thats what you need...

"Normal Glass produces a measurable visible glare of 8% Reflection.
PDI Optical Non Glare Glass measures between a Maximum Tolerance of 0.5% - 0.7%"

And if you can get a good price people here would no doubt be interested!
 
Ok, So I found out that there are non reflective films available for application to standard toughened glass which will greatly improve reflection issues.
I am having some samples done just to see what results can be achieved.
I doubt the tolerances will be as low as PDI Optical but should get a vast improvement, will keep you posted if interested.
Tom
 
You must log in or register to reply here.
Back
Top Bottom