Stern Spider Man - Audio Noise n Other Qs

[Biff]

Hi

Just picked up spidey today - great machine! Audio seems noisier (Buzzing) than my Iron Man. Any ideas what it may be, what i can try to reduce? It sounds like a data east

Also the shooter lane has some wood damage Anything i can to redice further damage where the ball comes out of the trough?

And Finally...

Any cool mods for it? I have a shaker motor coming. Anything else that adds any value to game play or aesthetics?

Cheers

JB

 

[ronsplooter]

Re: the buzzing, have a look at if any cables are routed near speakers and try and move them away if possible. Other possibilities could be the transformer (more of a hum though), bad speaker/s or maybe caps on the sound board.

Cliffy does shooter lane protectors for Sterns, a bit like this one but the Stern version:

https://www.pinball.co.uk/shop/banz...e-parts/cliffy-ball-eject-multifit-protector/

You might also want to get this to go with it:

https://www.pinball.co.uk/shop/protectors/stern-pinball-shooter-lane-protector/

There's loads of mods for Spiderman, for a start search for stuff done by Back Alley Creations....not cheap but pretty cool

 

[chris b]

take the starter out for the flo tube so it does not work and see if the buzz goes

 

[Biff]

@chris b you were spot on with that. Buzz is from Choke in top not from speakers. So converting to LED strip. Google time...

 

[stoptap]

@chris b you were spot on with that. Buzz is from Choke in top not from speakers. So converting to LED strip. Google time...

I think this might help Biff.

http://www.pinballinfo.com/community/threads/stern-tube-vs-led-panel.33796/

 

[Biff]

Cheers. After all that i think i will just turn up the volume