Up for sale is my William Jokerz, I've got a few final touches to finish off but is more or less ready to fledge the nest. A lot of work and new parts went into this, therefore looking for £1350 and will send a donation to the forum once sold.
The good (I'm sure there's more I'm forgetting)
- Fully working no errors and plays FAST
- Top of playfield fully stripped, cleaned and polished
- Fully LED'd playfield, backbox & flashers (Incandescent flashers left at back of ramp as looks far better)
- All new star posts and rubbers
- Beautiful new top ramp (It's clear not yellow!)
- New drop target decals
- All mechs came off underside of machine and were cleaned/serviced
- Complete flipper rebuild
- New shooter rod, flipper buttons, leg bolts and leg bolt brackets inside cab.
- Replaced paper coil wrap on all coils
The bad:
- Previous owner had a go at removing the mylar with what looks like a screwdriver so playfield is scratched in places
- Cabinet has the usual dings and scuffs you'd expect
- Damaged slingshot plastic. Pictured (I Couldn't source a replacement anywhere)
You're welcome to come and give the machine a go and Martin has been here plenty of times if you need to use him. Pictures below & a link to the shop log - hasn't been updated in quite a while: https://www.pinballinfo.com/community/threads/jokerz.40371/
Thanks,
James
The good (I'm sure there's more I'm forgetting)
- Fully working no errors and plays FAST
- Top of playfield fully stripped, cleaned and polished
- Fully LED'd playfield, backbox & flashers (Incandescent flashers left at back of ramp as looks far better)
- All new star posts and rubbers
- Beautiful new top ramp (It's clear not yellow!)
- New drop target decals
- All mechs came off underside of machine and were cleaned/serviced
- Complete flipper rebuild
- New shooter rod, flipper buttons, leg bolts and leg bolt brackets inside cab.
- Replaced paper coil wrap on all coils
The bad:
- Previous owner had a go at removing the mylar with what looks like a screwdriver so playfield is scratched in places
- Cabinet has the usual dings and scuffs you'd expect
- Damaged slingshot plastic. Pictured (I Couldn't source a replacement anywhere)
You're welcome to come and give the machine a go and Martin has been here plenty of times if you need to use him. Pictures below & a link to the shop log - hasn't been updated in quite a while: https://www.pinballinfo.com/community/threads/jokerz.40371/
Thanks,
James
Last edited: