DRD Registered Joined Oct 26, 2014 Messages 5,441 Location Newark Nov 29, 2015 #1 Have decided to bite the bullet and re-decal the head of my shadow. When I bought the game it came with head decals that the previous owner didn't get round to fitting there is a flywire between J126 pin 11 and j122 pin 5 on the solenoid board Is this normal, or some dodgy hack please ? Thanks
Have decided to bite the bullet and re-decal the head of my shadow. When I bought the game it came with head decals that the previous owner didn't get round to fitting there is a flywire between J126 pin 11 and j122 pin 5 on the solenoid board Is this normal, or some dodgy hack please ? Thanks
replicas Site Supporter Joined Jul 21, 2011 Messages 12,046 Location Lancashire Alias Nipper Pinball Nov 29, 2015 #2 It's definitely not normal.
OP OP DRD Registered Joined Oct 26, 2014 Messages 5,441 Location Newark Nov 29, 2015 #3 The game worked 100 per cent Could I ask a shadow owner, perhaps @mark9 if he is around, to drop a picture of these connectors onto the website so i can see what should be there Thanks
The game worked 100 per cent Could I ask a shadow owner, perhaps @mark9 if he is around, to drop a picture of these connectors onto the website so i can see what should be there Thanks
mark9 Site Supporter Joined Sep 7, 2013 Messages 3,026 Location Lincoln, Uk Alias Mark Craven Nov 29, 2015 #4 Yes can do but I'm out at the minute.
mark9 Site Supporter Joined Sep 7, 2013 Messages 3,026 Location Lincoln, Uk Alias Mark Craven Nov 29, 2015 #6 Mine has the link too.
Matt Adams Site Supporter Joined Aug 29, 2011 Messages 1,390 Location Middleton-on-Sea Nov 29, 2015 #7 So does mine, weird, never noticed it before!
OP OP DRD Registered Joined Oct 26, 2014 Messages 5,441 Location Newark Nov 29, 2015 #8 thanks guys. It actually looks "factory" as the wire is longer than the others to allow this looping But it also looks wrong Three working shadows wins the debate though
thanks guys. It actually looks "factory" as the wire is longer than the others to allow this looping But it also looks wrong Three working shadows wins the debate though
Paul Staff member Joined Oct 5, 2012 Messages 11,620 Location South Wales Alias Toibs Nov 30, 2015 #9 Deffo standard - It's in the Manual!!!
OP OP DRD Registered Joined Oct 26, 2014 Messages 5,441 Location Newark Nov 30, 2015 #10 This spindly little wire is hanging on by its last strand, so the first unintended consequence of the head decal will be a repinning job
This spindly little wire is hanging on by its last strand, so the first unintended consequence of the head decal will be a repinning job