REVIEW - PIN2DMD display RGB LED Colour from Pin-display.ch

  • Hi Guest,

    Want lots of pinball Machines to play in one place??

    One low cost price to let you play all of these??

    If you Fancy visiting the BIGGEST and BEST Pinball show of 2019 Click Here

    (Click the "x" in the top right corner to get rid of this message :D )

OP
OP
Pick Holder

Pick Holder

Site Supporter
Jul 18, 2016
1,104
599
113
Midlands
Guys - I am thinking about ordering some of these PCBs already made up from China. You wlll have to get your own RGB LED Panels. Anyone interested.
 

Audiofreak

Registered
Oct 14, 2019
11
10
3
Switzerland
Guys - I am thinking about ordering some of these PCBs already made up from China. You wlll have to get your own RGB LED Panels. Anyone interested.
I think you should open your own thread about that, it has nothing to do with the review of my services ;)
you dont only need the led panels, you also have to unlock the display, flash the firmware and get the sd card.
 
OP
OP
Pick Holder

Pick Holder

Site Supporter
Jul 18, 2016
1,104
599
113
Midlands
@Audiofreak - I have made up Pin2dmd panels for about the last 3 years. I am well aware of flashing the units, and plugging in an SD card.


All the parts and everything else is open source.

Not once have I questioned your services.

In fact in 20 seconds I could edit this thread and remove my review and change the title should you wish me to go down that route as it actually my thread already.

I did not realise the board was not your personal design.

 
  • Like
Reactions: M4carp

Audiofreak

Registered
Oct 14, 2019
11
10
3
Switzerland
@Pick Holder
all easy, i know this is your thread and there is really no need to feal attacked! ✌Neither did i say that i invented the pin2dmd (have a look at my website, i mention that more than enough), nor say that you are questioning me or did i say that you dont know how to handle the pin2dmd hardware. I only think that when you want to make your own dmds, its better placed in a new thread. And when you wright that it only needs the panels i added that it needs a bit more than that.
Luckily we all can have our own opinion but if you feel offended by what i say, then sorry for that...
 
  • Like
Reactions: Solar Sailer

Audiofreak

Registered
Oct 14, 2019
11
10
3
Switzerland
Nothing, no instructions just an adapter for the SD card. I was hoping to install this at the weekend..
Did you order for a virtual pinball? Then i dont send the clamps because you anyway need an external powersupply and there you normaly get a powercord with it. But if you need the clamps and cable let me know and i will send it to you 👍
 

Gonzo

Site Supporter
Sep 2, 2019
205
178
43
Sandhurst
Sounds to me as if the Colourdmd is easier to just plug in and go.

Next day delivery too..... I know it's more expensive but I think I'll go that way and order on Monday for the STTNG .
 
  • Like
Reactions: M4carp

Audiofreak

Registered
Oct 14, 2019
11
10
3
Switzerland
Hi
The 192 x 64 and 128 x 16 dmds are 100% plug and play. Swap the display, add the color file and play. By the 128 x 32 the powersource is to week to use the origiinal plug. By the end of next week i will offer optional a adapter cable for wpc89, wpc 95 and Bally. Data East will come later 👍
 
  • Like
Reactions: MadNat

Arv

Registered
Jul 21, 2011
2,167
1,166
113
Mine works a treat, just need to re-drill the four holes as they are too small.

Next job recolour Star Trek DE at some point..