No fear drop target FIXED

[Andy Hancock]

the centre 'no fear' drop target has stopped coming up.

When I opened up the play field this switch has fallen off (first picture)

From the mechanism under the target (second picture)

Can anyone tell me where it goes back on and how? Or send a pic of it in theirs?

The target goes up and down in test mode but not in gameplay

Cheers all

 

[ronsplooter]

You see the micro switch that is on the backside of that bracket in the bottom left of the mech as that pic looks....it's off that. The armature goes across and is activated by the plate on the plunger when the target drops. This tells the game that the target is down so it knows it needs reseting.

 

[stoptap]

Exactly what Chris said and it fixes back onto the switch like this.

 

[Andy Hancock]

Thanks guys . I think I see where it goes . Should it 'snap ' on or is there a pin I'm missing

Sorry for newb questions

 

[stoptap]

Snaps onto the two plastic lugs on the micro switch. Note there are actually two sets of plastic lugs, one pair near the switch button and another pair further back. You will probably need to snap it back into the pair furthest from the button (just like the top switch in the photo).

 

[ronsplooter]

Should just push/snap on as long as the little plastic tabs aren't damaged

 

[Andy Hancock]

Ok got it on thanks

Target doesn't drop fully which was a problem I had before and fixed so hopefully can sort that, so will look st that and get back to you wonderful guys if not !

Thanks again

 

[stoptap]

Probably going to need a strip and clean. Also check that the spring is in good order and not stretched and mangled.

 

[Andy Hancock]

All sorted . Thanks again both . Love this forum. Trust me I'm useless and I can get by with your help

Be really funny if one day I showed someone else how to fix something!