Hi Guys, had a issue turn up on NGG not come across this sort of issue before. basically there are loads of phantom switch activations. first one is when you turn it on, the jet popper fires about 5 times then it stops. when the start button is pushed it starts a 4 player game then after that its all very random, but mostly the jet popper firing a lot of the time. when the ball goes in the putting green scoop nothing happens until ball search. the more you play and start more modes it usually activates the tilt. I went In to switch edge test to try and locate what switch is activating the jet popper. the jet popper is linked in to the trough opto switch line. narrowed it down to ball 3 opto activates the jet popper. cleaned and reheated solder on both boards (all solder connections) and the jet popper opto also. still the same issue. could this just be a dodgy trough Opto board? can that cause issues with all the other random switches? Want to see if I am on the right lines before I order new trough opto boards, incase I am looking completely in the wrong place.
cheers guys, any help would be much appreciated
cheers guys, any help would be much appreciated