This is the 2nd Weebly MPU I have had in my Xenon. but I had to sell it so i ordered another one. i moved the game into the garage and when the new MPU arrived it wouldn't get past 4 th flash. I unplugged J1 and it booted ok. I then unplugged the lamp board and plugged each lamp plug in one at a time. The MPU booted until Lamp J4 plugged in. I swapped out the board with another and same issue.
Do I need to take out the connectors in the J4 plug and put them in 1 at a time to see which one is the issue? Any help greatly accepted.
Do I need to take out the connectors in the J4 plug and put them in 1 at a time to see which one is the issue? Any help greatly accepted.