What's new

For Sale Mirror Polished & Gold Plated Shooter Rods

Ant-H

Ant-H

Site Supporter
Joined
Oct 17, 2020
Messages
1,327
Location
South London
I was originally looking for a chrome shooter rod for my TAF but didn’t particularly want to pay the shipping/imports fees on getting one from the US. So I decided to make a few myself.

I have 2 sizes available , 32mm and 38mm. The 32mm versions are basically the diameter of a standard shooter rod.

I polish the aluminium up to a mirror finish and also can also offer them in high gloss black.
But I could get them powder coated in any colour you want.

24ct Gold plated shooter rods as well as gold shooter rod plates are also now available.

They come with a standard shooter shaft that fits 90’s Bally/Williams and System 11 games. Stern shooter rods are also available.

32mm or 38mm shooter rods in either mirror polished or powder coated - £43.50 delivered

32mm or 38mm Gold Plated Shooter Rods - £73.50 delivered

Gold Plated Shooter Rod Plate - £43.50 delivered

If you buy more than 1 at the same time, I can knock off the £3.50 postage from all other shooter rods 👍🏻


E7054C58-3931-400F-AC80-96F4DCF2AD5C.jpeg
D0EC06FF-E85B-42AD-B2A3-D4113156FCD5.jpeg
75A30B11-A403-47D6-A1B7-069D28F56CF1.jpeg
D16C24F8-F908-49ED-A123-DB8975D01FBA.jpeg
40E86249-2686-4E7F-8FA6-7EC7956ABB61.jpeg
IMG_9963.jpeg
IMG_9964.jpeg

IMG_9712.jpeg
 
Last edited:
The difference in weight between carbon and stainless steel isn't worth bothering about for you. It's only about 150kg/m3 heavier.
 
Moorey said:
The difference in weight between carbon and stainless steel isn't worth bothering about for you. It's only about 150kg/m3 heavier.
Click to expand...
The first one I made, I actually used a 38mm ball made from stainless steel. When I put it in a game to test, a full plunge lost nearly all its power. So in the end I went with aluminium
 
I’ve made some more of the 32mm polished shooter rods so both sizes are now available again.

I have some more of the gloss black versions next week.

Also I have been asked if I could make one for TOM and TOTAN. So I’ll be getting some 24 carat gold plated 32mm and 38mm shooter rods within the next week. 👍🏻
 
Bump

I’ve only got 3 of the large (38mm) polished shooter rods left now until I make another batch, which I’ll try and do before Pinfest so I can bring some with me.

I do have some Gloss Black available though.

I should also hopefully be collecting the gold plated ones next week.
 
Original post has been updated with prices for the 24ct Gold Plated Shooter Rods.

These came out great 🤩. The initial ones that I had plated are already sold but if anyone wants one, send me a PM as I’ve got more currently being plated.

I’ll also soon be able to offer matching gold shooter rod plates plus the small barrel spring in gold as well 👍🏻
IMG_9964.jpeg
IMG_9963.jpeg
 
Last edited:
I’ve sent out quite a few Shooter rods over the past month so I thought id give this a little bump.

I now have new shooter rod plates so can also get these gold plated or powder coated to match.

I can now do these for new sterns and Spooky pins as well.
I’ll also have some in a gold anodised finish available soon.

Here’s a few that I’ve posted out recently 👍🏻

IMG_5514.jpeg
112d2c50-e822-4522-9b93-b6b16e768aa6.jpeg
IMG_5513.jpeg
 
Hi Ant,

These look amazing. Would it be possible to order 3 x 32mm Chrome and 1 x 32mm Gold Plated,

Thanks
Andy
 
Ant-H said:
I’ve sent out quite a few Shooter rods over the past month so I thought id give this a little bump.

I now have new shooter rod plates so can also get these gold plated or powder coated to match.

I can now do these for new sterns and Spooky pins as well.
I’ll also have some in a gold anodised finish available soon.

Here’s a few that I’ve posted out recently 👍🏻

View attachment 239489View attachment 239490View attachment 239491
Click to expand...
That twilight one is super cool mate
 
I’ve had 3 from Ant
T.Z looks very good indeed.
Ive got a glass one for my TAF which will be fitted once it’s completed.
Now the GOLD one caused me a lot‘s of problems, it’s so bloody nice it’s cost me more money to get other bits done to match.

The quality of these are just outstanding.
 
Thought I’d give this a little bump. I have both 32mm and 38mm sizes in stock.

Sent out quite a few in the last couple of weeks, including a 24ct gold 32mm shooter rod along with matching plate.

IMG_5682.jpeg
IMG_5681.jpeg
IMG_6785.jpeg


Ive also got some more stainless steel Bally/Williams start button rings available.
As with the shooter rods, these are available in standard, polished, chrome and gold plated.
I can also get them powder coated.

IMG_6780.jpeg
IMG_6781.jpeg
IMG_6782.jpeg
IMG_6783.jpeg

IMG_6786.jpeg
 
Ant-H said:
Thought I’d give this a little bump. I have both 32mm and 38mm sizes in stock.

Sent out quite a few in the last couple of weeks, including a 24ct gold 32mm shooter rod along with matching plate.

View attachment 242471View attachment 242472View attachment 242477

Ive also got some more stainless steel Bally/Williams start button rings available.
As with the shooter rods, these are available in standard, polished, chrome and gold plated.
I can also get them powder coated.

View attachment 242473View attachment 242474View attachment 242475View attachment 242476
View attachment 242478
Click to expand...

Ant-H said:
Thought I’d give this a little bump. I have both 32mm and 38mm sizes in stock.

Sent out quite a few in the last couple of weeks, including a 24ct gold 32mm shooter rod along with matching plate.

View attachment 242471View attachment 242472View attachment 242477

Ive also got some more stainless steel Bally/Williams start button rings available.
As with the shooter rods, these are available in standard, polished, chrome and gold plated.
I can also get them powder coated.

View attachment 242473View attachment 242474View attachment 242475View attachment 242476
View attachment 242478
Click to expand...

Ant-H said:
Thought I’d give this a little bump. I have both 32mm and 38mm sizes in stock.

Sent out quite a few in the last couple of weeks, including a 24ct gold 32mm shooter rod along with matching plate.

View attachment 242471View attachment 242472View attachment 242477

Ive also got some more stainless steel Bally/Williams start button rings available.
As with the shooter rods, these are available in standard, polished, chrome and gold plated.
I can also get them powder coated.

View attachment 242473View attachment 242474View attachment 242475View attachment 242476
View attachment 242478
Click to expand...
Hello, I'm interested in getting 2 Bally/Williams start button rings, would you PM me the info. Thanks so much.
 
These are absolutely top quality. Really pleased with the ones I have installed :clap:

Would it be possible to order another 1 x 32mm Chrome
 
Hey Ant,
Just an observation….
I’ve been using the Bally assemblies on all my pins for a while now (sourced myself). Gold / chrome housing / rods, barrel springs etc…. the action is just great.
As you know the bushing on OEM Stern is metal on metal think they use brass within the housing.

I guess you are using the nylon sleeve…..
Thought I’d mention as that’s the lubricant for smooth operation 👍



E6D413C0-6148-4F27-BE51-D28BF211439C.jpeg
 
Sako-TRG said:
Hey Ant,
Just an observation….
I’ve been using the Bally assemblies on all my pins for a while now (sourced myself). Gold / chrome housing / rods, barrel springs etc…. the action is just great.
As you know the bushing on OEM Stern is metal on metal think they use brass within the housing.

I guess you are using the nylon sleeve…..
Thought I’d mention as that’s the lubricant for smooth operation 👍



View attachment 243462
Click to expand...
Thanks for the heads up mate. I don’t supply any sleeves with my shooters. It’s just the rod.
However I didn’t know that about Sterns, as I’ve only recently got my first one so good to know 👍🏻
 
You must log in or register to reply here.
Back
Top Bottom