Hi all - slight issue with our JP pro - the centre of the playfield is rather dark. I've seen Pinstadium, but at £275 for the cheapest one I would prefer to put that towards another Pin! Any ideas for how to light the playfield better on a budget?
And they work like a dream. I think they were quarter the price of pin stadiums, move from machine to machine with battery or mains power@Wayne J used to make his own.
MagnetsI think going the DIY route may be the best. Some strip lights from Amazon and Aluminium Angle may work fine!
Any thoughts on how to attach the L bracket to the cabinet while making it easy to remove the playfield?
I've ordered some magnetic tape and hopefully that should work - thanks!Magnets
Sure you can lift the playfield with magnetic tape attatched?I've ordered some magnetic tape and hopefully that should work - thanks!
That's the idea - I was thinking about normal double sided tape but that would block lifting the playfield so magnets would be perfect, but I'm not sure if the side bars are magnetic. Fingers crossed!Sure you can lift the playfield with magnetic tape attatched?
Why don't you make them like Wayne did and have them outside the cabinet. Angled down so they shine through the glass. You can then move from machine to machineThat's the idea - I was thinking about normal double sided tape but that would block lifting the playfield so magnets would be perfect, but I'm not sure if the side bars are magnetic. Fingers crossed!