Hi I have a Sttng with no power to R/h L/h out lanes switches 15,16,17 and 18

[Robert price]

Hi I have a Sttng with no power to R/h L/h out lanes switches 15,16,17 and 18 that’s what comes up on test report. So the kickback also doesn’t work There’s no indication on display open/close if you try either switch I checked them with a multimeter and they work ok. The other two return lanes to the flippers have sensors underneath when you put a ball on top the red light on the board comes on but no indication on display switch screen. Any help would be much appreciated. All the best from Rob

 

[Poibug]

Do 10.11.12.13.14 work in test

 

[Robert price]

Yes everything works except for 15 to 18

 

[Poibug]

Follow the link cable for the 1 line, sounds like that may have come off.the manual will tell you the colour

 

[Robert price]

Hi I’ve checked all the wires no damaged wires I’ve changed the diode at switch 15 checked it and switch 16 with a fluke all good I’ve got power and earth but still no reading on switch edge display on switches 15 16 17 18. But when you move a ball over eddy sensor for switches 16 and 17 the light on the circuit board comes on but nothing on the display I need some help it’s doing my head in

 

[ronnie63]

Looks like you need to check the green brown wire further up the chain?

 

[PinballDaze]

Looks like you need to check the green brown wire further up the chain?

View attachment 71193

Good advice. Can help if you're local. Pm'ed.