Am toying with doing the Colour Clocks again like i did last year... however i'm trying to work out if there's any demand for them this time around. If there's only a few then i may not bother, as this is a massive commitment my side (and i will probably end up taking a couple of days off work to be able to get them all done). I would need a minimum of 25ish in total to make this project happen again.
Original thread was here for more information : https://www.pinballinfo.com/community/threads/dmd-clocks-colour-2020-version.47089/
Looking at two different types this time....
Desktop.... 64x32 P2.5 Panels - Approx 35cm Long, 18cm high
Wall Clock..... 64*32 P5 Panels - Approx 80cm Long, 23cm high (these were the ones i did last year!)....
I hear rumors there will be updated software on the horizon... and also some new animations..... All those that already have one from last year will have access to the new software/images as/when/if this comes (You can either update this yourself, or I'm looking to do a chargeable "update service" if this is easier... more at the time)...
Terms would be the same : 50% up front, 50% on shipping.
Also worth noting that this is Charity-ware - €30 for each frame will be donated directly to a UK based charity - terms state "you make a donation to a charitable, humanitarian, research, animal or plant conservation association".... This will be done on your behalf.
There are two other payments to other parties that support the production of these (and are included in the price) - A donation towards the colouring/artwork, and a donation towards the plans/designs/hardware. Exactly the same as before.
Prices - Last year the Wall clocks were £350, delivered to your door.
I havent even started to price these yet... am expecting a little more since brexit and also the prices of the panels have gone up (due to availability).... So will update in a few days once i have had chance to do the maths... I'm hoping that the wall clocks will roll in under £400.. i havent produced the Desktop ones yet so will work on fresh prices for those... but they should be cheaper..
THIS IS A THREAD TO GAUGE INITIAL INTEREST - IF YOU ARE INTERESTED (NO COMMITMENT AT THIS STAGE) please use the Poll.... THIS IS OPEN FOR 7 DAYS ONLY!
I am hoping - if this works - that i should be able to get these done and delivered before Christmas 2021. This will depend however on supply lines - watch this space!
Many thanks
Paul
Original thread was here for more information : https://www.pinballinfo.com/community/threads/dmd-clocks-colour-2020-version.47089/
Looking at two different types this time....
Desktop.... 64x32 P2.5 Panels - Approx 35cm Long, 18cm high
Wall Clock..... 64*32 P5 Panels - Approx 80cm Long, 23cm high (these were the ones i did last year!)....
I hear rumors there will be updated software on the horizon... and also some new animations..... All those that already have one from last year will have access to the new software/images as/when/if this comes (You can either update this yourself, or I'm looking to do a chargeable "update service" if this is easier... more at the time)...
Terms would be the same : 50% up front, 50% on shipping.
Also worth noting that this is Charity-ware - €30 for each frame will be donated directly to a UK based charity - terms state "you make a donation to a charitable, humanitarian, research, animal or plant conservation association".... This will be done on your behalf.
There are two other payments to other parties that support the production of these (and are included in the price) - A donation towards the colouring/artwork, and a donation towards the plans/designs/hardware. Exactly the same as before.
Prices - Last year the Wall clocks were £350, delivered to your door.
I havent even started to price these yet... am expecting a little more since brexit and also the prices of the panels have gone up (due to availability).... So will update in a few days once i have had chance to do the maths... I'm hoping that the wall clocks will roll in under £400.. i havent produced the Desktop ones yet so will work on fresh prices for those... but they should be cheaper..
THIS IS A THREAD TO GAUGE INITIAL INTEREST - IF YOU ARE INTERESTED (NO COMMITMENT AT THIS STAGE) please use the Poll.... THIS IS OPEN FOR 7 DAYS ONLY!
I am hoping - if this works - that i should be able to get these done and delivered before Christmas 2021. This will depend however on supply lines - watch this space!
Many thanks
Paul
Attachments
Last edited:
