very nice
I know of 2 people on the forum who have used Pinball Dreams to have their playfields renovated. I was wondering how much this costs? My TZ has had a hard life and the playfield is not great - how does the renovation route compare to a repro playfield from Pinball Heaven for less than £800?
Steve,
It's an earth lug - designed to go under a screw head somewhere. If it was me I would unscrew one of the metal earthed screws and stick it under there however I will concede to someone who has the game to confirm where it SHOULD go
Paul
If you're getting the error with the switch matrix disconnected from the CPU then your fault is with U20 - ULN2803A and / or the LM339 at U18. At a quid each I'd just change them both and socket for the future.
I have loads of both Steve, can you check if they are socketed already or if the chips are soldered still directly to the board?
Was that after reconnecting the wire (if you have)....?? There's a short on row 1 - in case you hadnt noticed
failing that, did you tape the wire or check it's not in contact with others/machine??
Paul