D
Sorry to go of topic.. Is there a big difference in weight with the newer pins
Sorry i mean compared to pins like eg 90s ones with all the seperate pcbs in the backboxcompared to what? Stern compared to WPC yes, JJP compared to anything ? no.
I never trust those holes! Always take a line from the lane guide and ensure the flipper rubber is in-line (or parallel if slightly offset).I'm sure mine are correctly alligned as they point exactly at the 2 small holes, just feels a little different to my Metallica. I've read similar comments too about GOT, GB, BM66. Not a problem![]()
I'm pretty good at the left orbit shot, the right one not so much, not because of bad geometry, just my poor timing. I might have a look at the flippers the next time I have the glass off but don't want to bugger anything up.All initial BM66 came off the production line with flippers slightly lower than the lane guides. Seems to have continued throughout production as recently built premiums seem to have the flippers in the same position. I put mine inline with the guides almost immediately and never had issues with my left orbit like most did.
Haha that’s why I only jump in on Lyman games he packs every part of the game with little touches of brilliance, he simply pays attention to the little details that make a big difference.Great stuff. I only just realised today that the 3 flashing lights in the shooter lane relate to the top lane skill shot, it even tells you that on the screen. I really must pay more attention
. I did know about the super skill shot though.
If they do I’ll grab one for you, or I can get one sent over from Marco to Terry at PL if you deffo want one?That’s great, thanks - but do they have the Lebowski plastic protector set in stock? No worries if they don’t!
Mine's correct, thanks again.@Marvello 1 x BM66 inner art decals
@JustLikeMe 1 x BM66 inner art decals + hex spacer
@Sgt GrizZ 1 x Mick on a stick
@Sutol - got you sorted!
Just want to check with you guys that’s all you need before I pay and checkout order tonight now my parts in and ready to go.