Looking fantastic. I don't need to at the moment but I realise I cant see how to replace the bulbs behind those translucent stand up targets. Any clues? I've been playing this solidly for the past couple of weeks since @pinballmania got it going. Isn't the artwork amazing?
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Complete Bally Medusa - Playfield Cleanup
- Thread starter Courtney Blush
- Start date
best single ball game ever made.
OP
OP
@Jb3d It's a stunning machine. The lights at the top are a pain in the A**
the three at the back behind the targets are not the hardest to change. Lean over the machine with the playfield in the upright position whilst on the front lugs. There is a metal plate at each corner holding the red light bar on. Undo these plates, 2 screws each, and catch the light bar **UNPLUG IT FROM THE MAINS!!!** pull the lightbar away and towards the back of the machine and the three bulbs are on the lightbar.
The harder ones to change are the GI by the rear drop targets, same procedure and the A123B lights as you have to drop out the drop target bank, 7 screws to be able to get at them.
Hope that helps
Courtney
the three at the back behind the targets are not the hardest to change. Lean over the machine with the playfield in the upright position whilst on the front lugs. There is a metal plate at each corner holding the red light bar on. Undo these plates, 2 screws each, and catch the light bar **UNPLUG IT FROM THE MAINS!!!** pull the lightbar away and towards the back of the machine and the three bulbs are on the lightbar.
The harder ones to change are the GI by the rear drop targets, same procedure and the A123B lights as you have to drop out the drop target bank, 7 screws to be able to get at them.
Hope that helps
Courtney
There is also another way ,and that is to also lift it on the front lugs ,put this time lower the playfield . Make a prop which goes under the playfield to the floor ,making sure the playfield does not touch the front of the cab ,I measured ,cut and used a piece of 2"X1" to do this
Better than Eight Ball Deluxe ?
Flash Gordon rules the universe of single ball games for me 
Thanks @Courtney Blush and @carl lawrence !
OP
OP
OP
OP
And she's done. Just waiting for the back glass.
Thanks for following my thread
Hugs 'n' stuff
Courtney
Thanks for following my thread
Hugs 'n' stuff
Courtney
Looks great, that time really was an era of how to do pinball artwork.
Looks really nice ,great work !
And the over head lighting
And the over head lighting
OP
OP
Finally got the glass fitted
Not doing the cab as I don't mind it's age. The displays are fine it was just the strobe effect on the camera...
OP
OP
Salvaged original
OP
OP
