Hi
As above and pic, am after key and lock for the above please.
Thanks
JB
As above and pic, am after key and lock for the above please.
Thanks
JB
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Found it! Bally Kiss Head box Lock and key
- Thread starter Biff
- Start date
I got my 3 from Phil (Pinball Heaven)
https://www.ebay.co.uk/itm/25312402...pid=5338674831&customid=&toolid=10001&mkevt=1
https://www.ebay.co.uk/itm/25312402...pid=5338674831&customid=&toolid=10001&mkevt=1
OP
OP
Thank you.
If you have any unfitted, could you measure one for me please, do they meet the measurements in the drawing above? The one in your link looks, a little short if i am honest. Like its Gottlieb cousin, it is being used to move a long bar across the top of the back box to stop the back glass being removed. So isn't just a simple moving lock. the length is needed to reach the mechanism.
OP
OP
i did look earlier today, but none look long enough. Unless you, or anyone on here has experience if using the modern lock, for the long back glass bar mech in these older Ballys?
If you search for cam lock you should find some that will fit. I bought 30mm for Centaur and it worked fine
The cylinder dimensions seem standard but the lengths change. 30mm should work as the closest metric equivalent, the 3mm difference won't matter, the bar has a lot of flex in it.
CAMLOCK LOCKER LOCK FURNITURE LOCK MAIL BOX ALL SIZES CABINET DRAWERS LOCKERS | eBay UK
Ideal for desk drawers, glass doors &lockers. High-quality Lock and two Lock keys. Lock Size:, 25mm 30mm.
ebay.us
The cylinder dimensions seem standard but the lengths change. 30mm should work as the closest metric equivalent, the 3mm difference won't matter, the bar has a lot of flex in it.
OP
OP
Thanks all, 30mm purchased.
Might wanna alter the heading to
Found it
Found it
OP
OP
Yea, will do when i have it fitted and working mate…
OP
OP
All fitted and working. Anyone doing similar using these, would strongly advise you locktite the screw into the lock. If it falls off and the lock bar comes of the lock, it will be a sod to get into 
Thanks
Thanks
Think it’s why most no longer have locks lol ..ppl think fook faffing with that!!!
OP
OP
Yep, agree.
All fitted and working. Anyone doing similar using these, would strongly advise you locktite the screw into the lock. If it falls off and the lock bar comes of the lock, it will be a sod to get into
Thanks
This happened to my Centaur at Pinfest a few years ago. It wasn't packed up till Monday morning. The bar fell off and we couldn't pack it up, a few NLP guys including @Fantazia2 managed to thread thick cable ties through the vents and around the bar to pull it back. The cable ties are still there
Patent Pending Back box lock bar manipulation tool.
