Wanted Bally Kiss Head box Lock and key

[Biff]

Hi

As above and pic, am after key and lock for the above please.

Thanks

JB

 

[David_Vi]

Have you tried eBay? I got new locks for two of my Ballys on eBay. They're not unique pinball locks so you can get them anywhere

 

[HHH]

I got my 3 from Phil (Pinball Heaven)

https://www.ebay.co.uk/itm/25312402...pid=5338674831&customid=&toolid=10001&mkevt=1

 

[Biff]

I got my 3 from Phil (Pinball Heaven)

https://www.ebay.co.uk/itm/25312402...pid=5338674831&customid=&toolid=10001&mkevt=1

Thank you.

If you have any unfitted, could you measure one for me please, do they meet the measurements in the drawing above? The one in your link looks, a little short if i am honest. Like its Gottlieb cousin, it is being used to move a long bar across the top of the back box to stop the back glass being removed. So isn't just a simple moving lock. the length is needed to reach the mechanism.

 

[Biff]

Have you tried eBay? I got new locks for two of my Ballys on eBay. They're not unique pinball locks so you can get them anywhere

i did look earlier today, but none look long enough. Unless you, or anyone on here has experience if using the modern lock, for the long back glass bar mech in these older Ballys?

 

[HHH]

I will just nip out to the garage now and let you know

 

[HHH]

Sorry but they are 10mm shorter.

I can't remember what size I used on my Gottlieb backbox when I replaced that and I can't get to it at the moment.

 

[AlanJ]

I got my 3 from Phil (Pinball Heaven)

https://www.ebay.co.uk/itm/25312402...pid=5338674831&customid=&toolid=10001&mkevt=1

Too short

You need longer ones as @David_Vi says. eBay have em

 

[David_Vi]

If you search for cam lock you should find some that will fit. I bought 30mm for Centaur and it worked fine

CAMLOCK LOCKER LOCK FURNITURE LOCK MAIL BOX ALL SIZES CABINET DRAWERS LOCKERS | eBay UK

Ideal for desk drawers, glass doors &lockers. High-quality Lock and two Lock keys. Lock Size:, 25mm 30mm.

ebay.us

The cylinder dimensions seem standard but the lengths change. 30mm should work as the closest metric equivalent, the 3mm difference won't matter, the bar has a lot of flex in it.

 

[Biff]

Thanks all, 30mm purchased.