M
Mike McPartling
I'm reluctantly selling my much loved and cared for, Bally Corvette Pinball. As you can see from the photo's, it is in excellent overall condition for a Pin that's nearly 24 years old. It has been well cared for and maintained and works as it should with no faults. The only thing to point out, is the right side rail has been slightly dented (see photo) when in transit. It has never bothered me but the new owner would easily rectify this if being fussy. Obviously it's not brand new, it was made in 1994, so it will have some slight ware marks but as you can see, it really is in fantastic condition for it's age.
The new owner will be more than happy with this Corvette Pin.
PLEASE NOTE - I have recently had Dave out from Pinballdaze to service it and fit some worn parts, flipper coil, plungers, flipper rubbers and bulbs. Just the general wear and tear items but at least the potential new owner will have added piece of mind.
Dave did comment on what fantastic overall condition the pin was in and has obviously been looked after and should really keep it...
I am open to offers, but they MUST BE OVER £3000....
Please e-mail me with any sensible offers or any questions that you may have.
You can also e-mail me at mickey.mac46@gmail.com.
The new owner will be more than happy with this Corvette Pin.
PLEASE NOTE - I have recently had Dave out from Pinballdaze to service it and fit some worn parts, flipper coil, plungers, flipper rubbers and bulbs. Just the general wear and tear items but at least the potential new owner will have added piece of mind.
Dave did comment on what fantastic overall condition the pin was in and has obviously been looked after and should really keep it...
I am open to offers, but they MUST BE OVER £3000....
Please e-mail me with any sensible offers or any questions that you may have.
You can also e-mail me at mickey.mac46@gmail.com.
Last edited by a moderator: