When playing STTNG, always start by choosing either Launch Probe or Flipper Skill Shot
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Bad pinball advice
- Thread starter cooldan
- Start date
On TZ always plunge for the 10m skill shot.
Don't nudge
Always press both flipper buttons at the same time.
Last edited:
"Just stick any old fuse in and it'll be fine"
Hence bad advice 
Just get one, one will be enough!
Start with a hard plunge on White water (or Addams)
Always tell your wife about the next pin you are getting.
Always buy your pinballs unseen from Hove.
For optimum cleaning, dust ajax on the playfield, install rusty balls and play until the machine shines.
Buy your first machine from Pinball Paradise
Roadshow - first ball - get the skill shot.
Keep aiming for the Castle while playing Medieval Madness.
Similarly, Keep shooting at the Saucer on Attack From Mars...
Similarly, Keep shooting at the Saucer on Attack From Mars...
Edumacate me Paul (or anyone else that knows why this is bad?!)
It will start New York mode which is bad for 3 reasons:
1. The blade is a drain shot (SDTM).
2. Not many points from it anyway.
3. No chance of getting Miami which you can get a lot of points off.
So, what you need to do is plunge the ball into the bumpers and hope to light Miami instead of New York.
And tell her exactly how much it costs. Perhaps add a little extra £££ on top, so she really remembers.Always tell your wife about the next pin you are getting.
Don't mod you tables, it looks stupid.
wd40 is the best thing ever for pinballs
a Gottlieb "gobble hole" aint what you WANT it to be
doing a pinball show is really easy and stress free
bare mains cable on a pinball taking to a show?
no problem,tape is fine
poibug
PS that REALLY is sarcasm from me there
no problem,tape is fine
poibug
PS that REALLY is sarcasm from me there
Wez's new pin is here to stay,as he really wants it as a keeper,it's going nowhere,and no it wont have led's put in it
I think wez might be special
Make sure you oil all moving parts regularly - WD40 is a must for your pinball toolkit!
Any problems with the the pins on ebay can be solved by changing a fuse.
