What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Afterglow Nano - Group Buy - ** ££ payment time ££ **

Cables Shopping List

Column Cable
----------------------
2 x 9POS Connector Housing .156 (https://www.mouser.co.uk/ProductDetail/Molex/09-50-8091?qs=/ha2pyFadugKia8AH4/1GDMvwK2hzsL4GO8RLg3VgLA=)
16 x Trifurcon crimp terminal .156 (https://www.mouser.co.uk/ProductDetail/Molex/08-52-0113?qs=/ha2pyFaduhJH7gDhB/9sf97Q24bho%2B3OvoNmy4bTfw=)
1m x black 3A wire (http://www.swallowam.co.uk/misc.php#e or equivalent from mouser)
1m x white 3A wire (http://www.swallowam.co.uk/misc.php#e or equivalent from mouser)

Row Cable
-----------------
2 x 9POS Connector Housing .100 (https://www.mouser.co.uk/ProductDetail/Molex/22-01-2097?qs=/ha2pyFadujIEQkzoGlziyUxIHkP/gn7CHUksJzJKyM=)
16 x crimp terminals .100 (https://www.mouser.co.uk/ProductDetail/Molex/08-50-0114?qs=/ha2pyFadujh2f7KQ%2BXWe2d6E0tCKKZpLCtYbdvIlLc=)
1m x black 3A wire (http://www.swallowam.co.uk/misc.php#e or equivalent from mouser)
1m x white 3A wire (http://www.swallowam.co.uk/misc.php#e or equivalent from mouser)

Power Cable
--------------------
1 x 2POS Connector Housing .156 (https://www.mouser.co.uk/ProductDetail/Molex/09-50-8021?qs=LQQHZ4xw2XA5Y%2BRjNNGkVA==)
2 x Trifurcon crimp terminal .156 (https://www.mouser.co.uk/ProductDetail/Molex/08-52-0113?qs=/ha2pyFaduhJH7gDhB/9sf97Q24bho%2B3OvoNmy4bTfw=)
1m x black 4.5A wire (http://www.swallowam.co.uk/misc.php#e or equivalent from mouser)
1m x white 4.5A wire (http://www.swallowam.co.uk/misc.php#e or equivalent from mouser)
2 x aligator clips or hook probes (https://cpc.farnell.com/tenma/72-14...k-6a-70v-green/dp/IN08474?CMP=i-ddd7-00001003)


Additionals
-------------------
Wire stripper (https://www.ebay.co.uk/itm/Curved-W...203332?hash=item5d7541c604:g:HAIAAOSwtKVafZdq)
Pinballinfo approved™ Molex Crimp Tool (https://www.ebay.co.uk/itm/Crimping-Tool-Molex-0-1-2-54mm-0-156-3-96mm-PC-Connectors-Terminals-HT-225D/120933035908?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649)



You'll notice a few of the items double up (.156 trifurcons and 3A wire) but I thought it was better to separate out, just be aware when ordering. Hopefully everyone has a bit of wire lying around anyway that they can use. Please let me know if there are any mistakes or omissions!
Damn Davey! This would have saved me a **** ton of time last night.
 
As some of you may know I've been waiting on a shipment of Arduino Nanos to arrive before I can begin sending out everyones Afterglow boards. They've been running late - held up at a delivery office in East London somewhere. No customs letter received. The seller has just notified me to say they've now been been shipped back to China 😖 They've been nice enough to agree to resend but that may take a month or more.

In the meantime, I've ordered another 50 Nano boards from another supplier, which will hopefully arrive in two weeks. Very sorry for the holdup.
 
Don’t worry not your fault and you must be pretty *issed off, same story everywhere with cockups.
Im in no hurry so no problem here👍
Thanks for the update though.
 
Yes no big problem mate. These things happen all the time.

Gives me a bit more time to make up my cable set!

Thanks for the update
 
Stuff from China is a bit hit and miss at the moment, I am getting stuff weeks late - some of it coming overland from china to europe instead of via air (its interesting tracking stuff as it moves across china, through the 'stans and into eastern europe then across various countries in europe). Stuff via airmail seems to land in the UK - get pushed around a load of delivery offices in the south of england before making its way either up North to me or sent back to china. Royal Mail cannot cope. My local postie has to choose each day - is he delivering letters or is he delivering packets and parcels. He tells me that they are snowed under and the one man per van rule is a major problem, they dont have enough vans and cant hire enough to fill the need.
 
Yes I've heard similar stories from my postie. He said "you're lucky you have these parcels otherwise we wouldn't bother delivering your letters". I just feel sorry for them, tough job as it is.
 
Post offices, couriers and freight companies around the world are overloaded. No one was ready for this. Our post offices in Canada went from "we're broke, we need to raise pricing, we need to be taken over by an outside source" to outsourcing parcel deliveries and throwing parcels into cargo containers, locking the doors for weeks on end because they have too many to deliver. They are working 7 days a week now and still cannot keep up.

If they think it's bad now, wait until Black Friday and Christmas rolls closer. They are going to drown.

Davey, no worries on the AG. It happens when it happens.
 
Righto - the Nanos are here, they're good quality, took the Microcore bootloader without complaining and are all installed with the Afterglow code.

We're ready to send!

The easiest way for me to collect everyones addresses and print the postage labels is to send out a 1p paypal invoice. If everyone could pay that when it arrives it'll automatically give me access to everyones addresses and I can then print the labels directly within paypal. Expect those invoices to appear in your inbox sometime later today.

@Vimtoman @Toxteth O'Grady @new forest pinball @M4carp @Julian @Tony @broomstick @MadNat @MajesticPinball @richk87 @DanLewell @David_Vi @replicas @BigIan

The people who were after cables will be fulfilled last as I'm still waiting for some red test probes to arrive. If anyone takes issue with that.. welll... this is the price you pay for making me crimp so many cables you bast3rds 😂

@Fifty you are a special case mate as I think i'm doing a bulk send for you with some other bits so let's chat about that separately.
 
Last edited:
Ermmm.... sortof.... I've already made them up :-/

Treat this as an opportunity to learn some crimping, a good skill everyone should know!
 
So... like when are you doing a run of AGGI? (insert innocent whistling emoticon here).
 
Last 8 of these sold on flippermarkt in about 3 minutes which means we're now ALL SOLD OUT
 
I'm most likely going to wait for @MajesticPinball to sort mine out.

But as I'm off work for two weeks I'd be interested to see what I need and how you install it. Maybe I'll give it a bash
 
I'd be interested in a couple of aggi when your ready m8 lol

Sent from my SM-G965F using Tapatalk

Sure mate I'll put you on the list.

I'm most likely going to wait for @MajesticPinball to sort mine out.

But as I'm off work for two weeks I'd be interested to see what I need and how you install it. Maybe I'll give it a bash

Absolutely! Making up the cables will certainly not be beyond you, although you will have to buy a few tools and bits. PM me any questions you have.
 
Mine arrived yesterday @stumblor - cracking job mate - looks sexy in black.

Thanks for the handy widget also... already used it to custom mix TZ blue paint - for my cab restore project.

Off to grab ToTAN colours today [emoji106]
 
Last edited:
Got mine today.
Thanks @stumblor, very nice indeed. Much appreciated👍
Going in whitewater and AFM, will swop out the led ocd board in FT and see which one looks best also.
Good to have a spare or two as well.
Cheers.
 
Got mine today.
Thanks @stumblor, very nice indeed. Much appreciated👍
Going in whitewater and AFM, will swop out the led ocd board in FT and see which one looks best also.
Good to have a spare or two as well.
Cheers.
Oh man, I had an LED OCD in my White Water. It was night and day. I loved tweaking the brightness for each LED in the software. You need to get an AGGI for it, the GI does some funky GI stuff in that pin when multiball starts and when you complete the game.

@stumblor Is the AG software on Github? I'll admit I haven't look yet.
 
Back
Top Bottom