What's new
By:
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

In Progress Aerosmith

1000272854.webp
 

Attachments

  • PXL_20251123_112435831.webp
    PXL_20251123_112435831.webp
    256.7 KB · Views: 54
  • PXL_20251123_112434859.webp
    PXL_20251123_112434859.webp
    224.2 KB · Views: 59
  • PXL_20251123_112433796.webp
    PXL_20251123_112433796.webp
    223.6 KB · Views: 51
  • PXL_20251123_112432733.webp
    PXL_20251123_112432733.webp
    202.4 KB · Views: 61
Looks like the cage around the motherboard will have helped a little with the heat. Out of all my Spike 2 games Aerosmith is the only one fitted with this cage. If you need any details of what colour wire goes where, then i can get some pics of mine for you :thumbs:
 
Have a look inside the cage if anything has dripped onto it and remove asap, this stuff can be quite corrosive. Looks eminently doable otherwise. What burned next to it?
 
So still waiting for a reply from Stern on the parts, notable the wooden backbox bits.

But this is what I think the BOM is.

translite
backbox decal left
backbox decal right
main cabinet decal left
main cabinet decal right
main cabinet decal front
Translite
Translite trim (left, right, upper and lower lip)
Spike 2 CPU to LCD cable
Spike 2 CPU to translite LED illumination left cable
Spike 2 CPU to translite LED illumination right cable
Spike 2 CPU to Power cable
 
Stern parts department got back to me!


Thalia Cruz (Stern Pinball)

Dec 1, 2025, 3:18 PM CST

Good afternoon Oliver,

Part numbers for the decals and translite can be found on the Aerosmith manual on page 8.

1000274531.webp

Part number for the left side panel with black T molding is 525-9704-01-00 and part number for the right side back panel with black T-molding is 525-9704-02-00 .

Part number for the LCD harness is 037-1116-00.

1000274532.webp

Part number for the decal left of the CPU is 820-8411-03 and part number for the decal to the right of the CPU is 820-8411-02.

Part number for the LCD back light is 037-1115-00 . I had to reach out to engineering for the other part number for the other harnesses. Once I have these, I will share the part numbers with you.

1000274533.webp

Thank you,
LVvOcks6_o.png

Thalia Cruz
Technical Support Engineer
 
Davey D said:
How has the metal back box held up? if its still in shape you could just get it re powdercoated
Click to expand...

It was ok when I initially inspected, just some melted tmolding stuck to it. Should clean up fine. The game is sitting at my parents house because I don't have room so hoping to get back to it at the weekend!
 
Throw away any tempered glass.

It will randomly explode at some point in the future, filling your entire house will small cubes of glass that you will be finding for the next 10 years.

It's happened to a couple of other people with heat damaged machines
 
You must log in or register to reply here.
Back
Top Bottom