£750 (only to forum members)
[Scroll down the thread for photos]
I've spend a load of time and money on it.
Full playfield stripdown, deep clean, new rubber and balls, bulbs etc, all the usual things.
All 3 flippers rebuilt at great expense
New mains lead
New volume pot
New CPU board headers for lamps (common failure point) and loom connectors
NVRAM fitted
CPU board strip down, all new turned pin sockets, new molex connectors for power etc
Cab touched up
Has all LED GI
Nice backglass
Has new reproduction 6803 keypad
I will take some photos when I get time, but will post videos below showing the restoration.
Viewing and collection is person if preferred as I would rather show you round every detail of the machine so you know what you are buying. There are no hidden secrets, but there are a few imperfections as with any machine of this age (wrinkles in the mylar, couple of non fatal plastic cracks etc) I guess the worst thing is the side rails, as with all mid 80's Bally's there are some flaking of the coating/corrosion, as they metal they used was terrible.
There is no topper
[Scroll down the thread for photos]
I've spend a load of time and money on it.
Full playfield stripdown, deep clean, new rubber and balls, bulbs etc, all the usual things.
All 3 flippers rebuilt at great expense
New mains lead
New volume pot
New CPU board headers for lamps (common failure point) and loom connectors
NVRAM fitted
CPU board strip down, all new turned pin sockets, new molex connectors for power etc
Cab touched up
Has all LED GI
Nice backglass
Has new reproduction 6803 keypad
I will take some photos when I get time, but will post videos below showing the restoration.
Viewing and collection is person if preferred as I would rather show you round every detail of the machine so you know what you are buying. There are no hidden secrets, but there are a few imperfections as with any machine of this age (wrinkles in the mylar, couple of non fatal plastic cracks etc) I guess the worst thing is the side rails, as with all mid 80's Bally's there are some flaking of the coating/corrosion, as they metal they used was terrible.
There is no topper
Last edited: