D
Deleted member 2463
has anyone worked out a list to convert stern Spider-Man to LEDs?
Just trying to save myself sometime
Neil.
Just trying to save myself sometime
Neil.
Whatever you do, don't colour match yellow LED with yellow insert!
I agreeblue in particular looks really washed out if not colour matched. Green looks better colour matched too. Definitely easier to just install white though admittedly.
But with Neil's time constraints i felt a universal approach would still be more than acceptable. Red inserts also look more 'red' with a red LED, it's just how far do you go. LED it with whites, then if you want later you can take them out and replace on a per-colour basis and reuse them elsewhere.Just trying to save myself sometime
IMHO just buy:
a saver bag of sunlight white wedge 555
&
A saver bag of sunlight white in bayonets 44/47
Colour matching is overrated, and time consuming! Plus different colours have different brightness (e.g. white vs yellow), so using the same bulbs under the inserts keeps your inserts at a consistent brightness level.
Sunlights whites are universally useful too.
SM needs an OCD board for LEDs, and some minor fettling. If you don't use it then you'll need antighosting bulbs, otherwise buy the simpler type. I use the 2smd frosted.
You may want some green GI bayoneted and flashers for the goblin area though, I'm not a monster...
Made that mistake before. Just bin the yellow ones. They should never be included in a kit Mr. PinballLEDWhatever you do, don't colour match yellow LED with yellow insert!