Hi I’ve just bought a machine with Pinsound + board fitted - no it all boots works fine but if you leave it for 5 minutes after playing a game the music element of sound is barely audible ( the call outs are fine ) switch machine of and back on and it’s all good again . Any ideas ?
Pinsound losing music after standing idle
- Thread starter davro-one
- Start date
Have you installed the latest firmware? The latest version came out mid January - https://www.pinsound.org/help/pinsound-plus-help/
It used to happen on ours but I havent noticed it in awhile so assumed an update fixed it
It used to happen on ours but I havent noticed it in awhile so assumed an update fixed it
I’ll give it a go. Do you simply unplug the music stick and plug in a stick with the firmware on it ? Then re- insert the music stick ?
Hate firmware lol
Hate firmware lol
Just copy the firmware update file to the root of the USB stick and plug it back in, leaving the other folders / files alone - it will do some analysis and take a few mins after you start it up, usually it tells you via some nice ladys voice what's going on.
If you still experience problems the boys at pinsound are very helpful.
I had this exact same issue in my T2. Turns out it was getting too hot. I replaced all the back box bulbs with LED's and it solved the heat issue. No more sound issues.
