Hey people,
So, judge dredd upper opto randomly goes off, (big loop used for skill shot)
put it into switch test, bang the sides of cabinet and playfield, doesn't activate, tap the metal ball guides with a screw driver and it activates, flip upper right flipper and it activates, wiggle wires to receiver under playfield and it occasionally activates, rarely it will stay stuck on as activated for a few seconds.
Tried cleaning both optos several times, I know sometimes it's hard to diagnose something through text, but am I looking at replacing the optos?
I've never soldered onto a pcb before, not only that but it appears to get to the receiver opto means removing the vast majority of ramps, ffs!
Advice, appreciated!
So, judge dredd upper opto randomly goes off, (big loop used for skill shot)
put it into switch test, bang the sides of cabinet and playfield, doesn't activate, tap the metal ball guides with a screw driver and it activates, flip upper right flipper and it activates, wiggle wires to receiver under playfield and it occasionally activates, rarely it will stay stuck on as activated for a few seconds.
Tried cleaning both optos several times, I know sometimes it's hard to diagnose something through text, but am I looking at replacing the optos?
I've never soldered onto a pcb before, not only that but it appears to get to the receiver opto means removing the vast majority of ramps, ffs!
Advice, appreciated!