All the nasty old bulbs will be replaced with nice new comet ledsPinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Complete NGG full workshop anyone
- Thread starter chris b
- Start date
All the nasty old bulbs will be replaced with nice new comet leds
Great log, I'm enjoying the realtime speed of progress.
Was wondering why you don't take the pops off, don't they get in the way of the pf cleaning?
Was wondering why you don't take the pops off, don't they get in the way of the pf cleaning?
An hour on the super mint ss and that’s me done today
Get yourself a beer.
Just fab!
Good question that yes I should have removed then and then t cut playfield as I was replaceing them anyway
Normally on a workshop job you would never remove them as they are a bit of o pig to remove you will see why further in my log
Fab log - although I think mere humans may take a lot longer for a full strip and clean.... SS for a customer or going up for sale?
Think I know who it’s for 
JY out for a new pin, previously looking for a NGG, me thinks Kenny has got himself a fully shopped NGG.Think I know who it’s for
Sadly not me :-(
Think I know who the SS is for?
Think I know who the SS is for?
That’s a good t cut done
sweet as ever Chris and so bloody fast!!!!!
Cheers
kev
Cheers
kev
Never thought of using T-Cut.. Nice work..
Waxed
Wireing up the pop bumpers I don’t particularly like the wire type ones but it’s pretty much impossible to get the standard ones back in as there is no space to re staple them down nothing wrong with wire but just don’t look as neat
I am running out of stuff to do now as most stuff in the tumbler and had to order some parts from America so will be a bit more steady from here Nice display fit and old one in bin
Batteries changed missing screws on lock bar replace and shooter rod re built
Chris, spotted an error. NGG was Williams not Bally..
Good spot kenny I have a spare Williams one so will swap over
Not much progress with the ngg these last few days but metal is out of the tumbler
On a more positive note the ss playfield underside is done
Right back too it had several other more important jobs to do so this was put to one side for a bit all parts are now here so let’s get cracked on First job all the switches to fasten up from underneath and all the posts to re fit from the top
All targets re foamed
Little gofers tip for you fit the rubbers before you fit the ball guides
So that’s all re rubberd ball guides fit and gofer ramps
All lamp boards back on with the finest comet leds fit That’s enough for this afternoon big mech re build day tomorrow
It’s mech morning
Will start simple and build up to the more complicated mechs All parts have be tumbled and cleaned new coil sleeves fit on all mechs pop bumpers done
That’s mech morning done