Starting a ngg full workshop Monday anyone want a shop log
F**k me Chris you don't hang about! That's probably the fatest playfield strip I've seen!
Hey Chris, that's looking ace so far! Are there any cleaning techniques you'd recommend for particularly stubborn marks please? Been cleaning up an IJ with Novus 1 Clean and Shine and mill wipes but there's still some patches of dirt that aren't lifting/feels like they're slightly in indentations on the playfield?Top side of playfield foam cleaned I am out of t cut so can’t do anything else on top side today
Hey Chris, that's looking ace so far! Are there any cleaning techniques you'd recommend for particularly stubborn marks please? Been cleaning up an IJ with Novus 1 Clean and Shine and mill wipes but there's still some patches of dirt that aren't lifting/feels like they're slightly in indentations on the playfield?
Ace! Thank you. Silly one maybe but is it alright to use foam cleaner without removing all the vitals from underneath the playfield? Just wondering if it expands loads and goes everywhere? Or could you spray it on a cloth first and use in a targeted area?Novus 1 is really just for polishing plastics.
Foam cleaner and Novus 2 usually shifts most dirt.
View attachment 59397
About an hour and 20 mins to strip doesn’t take that long due to a few things
1 I use a drill with a nut driver in speeds things up massively
2 I have 100s of pics on file of this game as I have done one before
3 on wpc95 games all the coils have crimp connectors on so plug and play speeds things up
On the top end super mint stuff I do I have over a day soldering in new targets switches and mechs and some burned fingers at the end of the day
Hey Chris, that's looking ace so far! Are there any cleaning techniques you'd recommend for particularly stubborn marks please? Been cleaning up an IJ with Novus 1 Clean and Shine and mill wipes but there's still some patches of dirt that aren't lifting/feels like they're slightly in indentations on the playfield?