I've started on my new Pinroom build, well actually first on a new garage build followed by the conversion of the old garage to the Pinroom.
Progress so far (new garage):
First couple of days on dig-out, hardcore and framing for the pour.
Then the pour:
4 days later, the garage build starts - by lunchtime:
Then end of the day:
Day 3 the garage is up, roofed, tiled, doors on, drainpipes up and a day of adding and moving around soil (3 truckloads!) and digging for the duct / conduit across to the old garage for power and CAT 6):
Garage is 10mx6m with an extra 1m on the right for a log store.
Now to seal the floor and move all of my crap over from the old garage to the new. This will be the actual new Pinroom:
It's 10m x 6m with room for 17 pinball machines (I think). I'll have a small room to house the boiler in one corner and the dogs kennel comes in from the outside on another corner taking up space for at least 2 pins.
Sparky quotes are in, just need to find a good builder for do the internals!! Hopefully done by end of September / early October. Will post pics of the interior when that starts. Needs to be ready for the Funball Four in November, so a little tight on time but I'm not panicking just yet!
Progress so far (new garage):
First couple of days on dig-out, hardcore and framing for the pour.
Then the pour:
4 days later, the garage build starts - by lunchtime:
Then end of the day:
Day 3 the garage is up, roofed, tiled, doors on, drainpipes up and a day of adding and moving around soil (3 truckloads!) and digging for the duct / conduit across to the old garage for power and CAT 6):
Garage is 10mx6m with an extra 1m on the right for a log store.
Now to seal the floor and move all of my crap over from the old garage to the new. This will be the actual new Pinroom:
It's 10m x 6m with room for 17 pinball machines (I think). I'll have a small room to house the boiler in one corner and the dogs kennel comes in from the outside on another corner taking up space for at least 2 pins.
Sparky quotes are in, just need to find a good builder for do the internals!! Hopefully done by end of September / early October. Will post pics of the interior when that starts. Needs to be ready for the Funball Four in November, so a little tight on time but I'm not panicking just yet!