Took delivery of my lovely shiney Banzai Run yesterday, grail pin for me so well chuffed. Its been fully leded but the left hand side GI is out and the fuse blows when replaced.
The leds did stay on for a few mins after changing the fuse before it blew again.
This is @lee riley old beautifully restored game, could a faulty led cause the issue or more likely a lamp holder? Whats the process to nail down the issue? The gi holders are stapled in and soldered to a wire braid so all a bit tricky under the bonnet.
Should I pop out all the gi led lamps then add them back in one by one till the fuse blows and replace that lamp holder? Any advice welcomed please!
Cheers,
Jon
The leds did stay on for a few mins after changing the fuse before it blew again.
This is @lee riley old beautifully restored game, could a faulty led cause the issue or more likely a lamp holder? Whats the process to nail down the issue? The gi holders are stapled in and soldered to a wire braid so all a bit tricky under the bonnet.
Should I pop out all the gi led lamps then add them back in one by one till the fuse blows and replace that lamp holder? Any advice welcomed please!
Cheers,
Jon