Anyone know where I can get part number A-18001 spring and bracket trigger assembly for Demo man?
Or something that can be used instead?
Or something that can be used instead?
Demolition man trigger part
- Thread starter Andy Hancock
- Start date
OP
OP
I think I might have the wrong part number there
It’s this micro switch in the trigger handle but can’t see it on pinball mania or pinball heaven ?
It’s this micro switch in the trigger handle but can’t see it on pinball mania or pinball heaven ?
- Joined
- Jul 21, 2011
- Messages
- 2,468
Looks like
5647-12693-31 Microswitch with 1.9" Flat Actuator
5647-12693-31 Microswitch with 1.9" Flat Actuator
pinparts.co.uk
OP
OP
Thanks Andy . It’s at my mates and he reckons it’s 3” actuator so I ordered 3 and 4 inch ones from you earlier .
might be a dumb question but do the ones I ordered have screw holes in as can’t see easily on the pics?
also it’s the attenuator that has snapped apparently so I was thinking easy enough just to swap that over rather then use the switch
is that correct ?
- Joined
- Jul 21, 2011
- Messages
- 2,468
I think you’re looking at the wrong broken pArt. See the two screws at the top. There should be a leaf spring there that crosses the void to the switch.
Is the real part but in the past I’ve used a piece of a leaf switch.
