Anyone know where I can get part number A-18001 spring and bracket trigger assembly for Demo man?
Or something that can be used instead?
Or something that can be used instead?
Pinball info
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Demolition man trigger part
- Thread starter Andy Hancock
- Start date
OP
OP
I think I might have the wrong part number there
It’s this micro switch in the trigger handle but can’t see it on pinball mania or pinball heaven ?
It’s this micro switch in the trigger handle but can’t see it on pinball mania or pinball heaven ?
- Joined
- Jul 21, 2011
- Messages
- 2,468
Looks like
5647-12693-31 Microswitch with 1.9" Flat Actuator
5647-12693-31 Microswitch with 1.9" Flat Actuator
pinparts.co.uk
OP
OP
Thanks Andy . It’s at my mates and he reckons it’s 3” actuator so I ordered 3 and 4 inch ones from you earlier .
might be a dumb question but do the ones I ordered have screw holes in as can’t see easily on the pics?
also it’s the attenuator that has snapped apparently so I was thinking easy enough just to swap that over rather then use the switch
is that correct ?
- Joined
- Jul 21, 2011
- Messages
- 2,468
I think you’re looking at the wrong broken pArt. See the two screws at the top. There should be a leaf spring there that crosses the void to the switch.
Is the real part but in the past I’ve used a piece of a leaf switch.
