Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I'm wanting to put an RGB changing LED inside my scoop on my Tron. I want the light to be on constantly. What is the best way to do this? Parts, mounting and hooking up advice all required please
Done this a few times. Just ties into a lamp off the GI on underneath of playfield. Lamp holder and a lamp, couple of solders, 2 bits of wire.
Just don't stick it too close to the solenoid arm.
No resistors required? Where is the best place to get a single #44 lamp holder from? Also I know it sounds really OCD but I'd also like to get a screw that looks identical to all the others used on the stock lamp holders on my machine.
Also looking for RGB LED recommendations for this mod.
I think you need a small bridge rectifier also otherwise the RGB led will start 50 times a second because of the AC from GI.
It will probably stay on 1 color, (I guess Red)