Zaccaria Robot Restored

[DAW6205]

Hello everyone,

I would like to take this opportunity to show this group some of our "restoration" work on our customers' pinball machines. These pinball machines come to us in terrible condition but leave our workshop looking brand new.

All the work is done with a compressor and paint, including the reproduction of the playfield and backglass if necessary, metal polishing, coin door legs, etc. We also reproduce the graphics of the playfield components, bumpers, and their covers, targets, and more.

Just like in electronics, we update or replace damaged circuit boards with new ones if affected by acid, and connectors are changed if necessary. Every detail of the pinball machine is inspected, repaired, and/or replaced as needed.

Essentially, the pinball machines leave our workshop as good as new, and our satisfaction lies in the customer's satisfaction.

Attached are some Images of a Zaccaria Robot ready to be shipped to the final customer

 

[DAW6205]

Here more images

 

[DAW6205]

please find the old Robot cabinet attached.
then some images of its restoration .

 

[DAW6205]

Stripped and repainted

 

[DAW6205]

the webbing by Gun of compressor

 

[DAW6205]

Its Artwork printed by silk screen

 

[DAW6205]

All its targets reprinted

 

[DAW6205]

Final Job

 

[HomerRamone]

Great stuff.
Dont recall ever seeing a Zac in the wild. But I do have a Zac pinball thing on Steam and they looked to have made quite a few tables. Some of them seem pretty cool.
Think there was a robot on here a while back