You pays for what ye get

[CHRIS B PINBALLS]

Just fit a new clock board in my tz and I thought I would just put the difference in a quality one and a cheep one the one I replaced was a rotten dog one not that old but just look at the difference between that and the ingo quality one
I would highly recommend Ingo clock boards easy to fit good instruction you can put whatever colour leds in you want and you can adjust the brightness on the pot

 

[M4carp]

Yeah not long replaced a newish clock board for the Ingo one that was always dodgy from when I bought my TZ, no point replacing with anything else.
Works great and looks extremely well built, I had a few colours but stuck with warm white lit dimly. Spot on

 

[CHRIS B PINBALLS]

Here a pic of the difference

 

[Hullshark]

Website deactivated

www.german-pinball-modular.de

 

[johnwhitfield]

So £100 ish for the Ingo one. How much is a rotten dog board? I’m guessing not that much cheaper.

 

[Pick Holder]

Rottendog are not my favourite boards period.... You may as well mod the stock one than pay for the rottendog......

 

[Matrixnetuk]

Still waiting for my Ingo to arrive ...22days in transit is this the norm ? :-(

 

[Durzel]

Ingo is quality. That being said he’s been quite snowed under in recent months. He sent me a set of rainbow LEDs for free after mine started flickering, so he’s awesome in my book.

When it comes to the clock taking it apart is not something you’d want to do regularly, therefore get the board and never have to worry about it again. A really quality bit of kit.

 

[CHRIS B PINBALLS]

Still waiting for my Ingo to arrive ...22days in transit is this the norm ? :-(

It did take some time he i a one man band and makes them in batches to order I think

 

[stumblor]

Was just reading his website. To disable the diagnostic LEDs you pull the resistor network, and then put it in a 'Park position' slot so it doesn't get lost.

It's a small detail but that's pretty clever.

 

[stumblor]

Also that rottendog board looks like it was knocked up in about 5 minutes

 

[Monkeyboypaul]

there are a few other clock boards knocking around out there. Here's a new one on me:

https://www.pinballlife.com/twilight-zone-clock-pcb-assembly.html

 

[stumblor]

there are a few other clock boards knocking around out there. Here's a new one on me:

https://www.pinballlife.com/twilight-zone-clock-pcb-assembly.html

View attachment 114482

To be honest that looks pretty pants as well. Not even smd leds, just some cut LED strip lighting, likely done that way to cut down on soldering effort.