What's new
Pinball info

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Xenon Help

JAG555

Site Supporter
5Years
Joined
Jul 23, 2017
Messages
3,064
Location
Essex, UK
Afternoon,

I have an issue with my Xenon, that I hope one of you clever people can help me with.

Xenon was working fine, then turned it on yesterday, all powered up fine, then after about 15 seconds, all flashing lights, chase lights etc. when out. The GI lighting is still on, but I cannot start a game and there is no sound etc.

I am going to test a few things this afternoon, such as fuses and connections, but has anyone had any experience with this type of error and can point me in the right direction?

Thank you in advance.
 
Check the power rectifier board and that the MPU is getting voltage, i think it's the top left connector on the mpu. ( J3?)

The tell tale here is you have GI and nothing else, GI comes directly from the transformer (via power rectifier) but everything else is controlled via the MPU, so I would guess the MPU isn't booting, that could be power to it from the rectifier, or a bad connector on the board.
 
Check the power rectifier board and that the MPU is getting voltage, i think it's the top left connector on the mpu. ( J3?)

The tell tale here is you have GI and nothing else, GI comes directly from the transformer (via power rectifier) but everything else is controlled via the MPU, so I would guess the MPU isn't booting, that could be power to it from the rectifier, or a bad connector on the board.
Thanks David.
 
Back
Top Bottom